Forgotten password.
If the password has been forgotten then there is only one way to fix that and this is in the registration data base.

It can be found in windows under Start → Run → “RegEdit”
“\HKEY_USER\…\Software\VB and VBA Program settings \Freestyler \Settings”
There is a “Password” label and this can be edited or deleted.

But be carefully not to mess anything up because if the registration database are destroyed then it is a new installation of the whole PC.

Some Fixures doesn't Blackout.
- This can happen because the Shutter CH isnt' set correct, so to solve this you have to set the Shutter CH correct with the Fixture Creator.
Fixture Creator - Lamp Configuration


No “OFF” button for Strobe.
The strobe are stoped by using the Shutter “Open” or “Closed” Button.
Lamp Panel description


Red X icons in the fixture control panels.
This indicates that no imgae is attached to this DMX value in the DMX tables.
See: Gobo Configuration. The description of Gobo wheel 3


The Blue Ball don’t move in the movement panel.
When running Shape the Blue ball don’t move. However monitoring the DMX output for Pan and Tilt it can be seen that these values changes with the shape.
The update of the blue balls position was removed because of some error issues.


“Flip” don't bring the beam to the correct position
Flip should flip the fixture but keep the beam at the same point.
If the “Range” value is not defined or wrong then the beam will be moved after a flip.
See: fixture_creator_movement_configuration

Cues turn each other of.
When more cues are to run at the same time “Cue Multiselect always enable” are to be set on.
Link to multi cue.missing please enter when topic is made
Note “Cue Go to previous value always enable” this restore the values when a cue is stopped.
Additional note that the sequences are to be made as Transparent (Transparent Mode).
Link to Seq .missing please enter when topic is made


Shape movement stops when cue are turned on.
It is important to notice that the shape movement is not a stand alone movement generator.
Shape has to be added in a sequence and then into the cue like everything else.
If the shape is not in a cue the it will be turned off when the is started.
Link Add Shape on Sequence.missing please enter when topic is made

Number of scenes.
The max no of scenes / steps in the sequencer was in the version before V3.4 = 15.
From version 3.4 it is 45.
The number can be changed in the file “freestyler.ini” which is in the freestyler folder.

[NumberOfScenes]
Number=45

See eventually: freestyler.ini

You can also download “FS configuration tool” Click here to Download the FS configuration tool

Disadvantages (Pleas fill in if you know any)
The FreeStyler statup time will be longe




Color display on the screen don’t change for the fixture.
When running with time shorter than 400 the small color display on each fixture don’t change.
This is made so due to graphic handling on slow PCs.


Sequence / Cue override everything.
Check that the Sequence is made in “Transparent Mode” with not use faders in “Off” mode.

No item

a window have disappeared
This can happin if you have draged one of the windows to the second screen

you can Reset all the windows, Go to Setup→Freestyler setup→Preferences→Extra options and Press “Reset Window postions”

No item

Midi controll / Freestyler is getting slow
-This can happin if the Drivers a not Intalled, So Go an install the Drivers from the Midi controller.
-it can also be caused by the Midi output, This means you'r using USB1.0. so to solve this get USB2.0 or Turn off the Midi ouput.

Light doesn't react to the dmx out from freestyler.
1)Be sure you selected the right fixture in Magic 3d.
2)did you selected “Virtual interface” as your Interface.

Magic 3D view runs Very Slow
this can be caused by the resolution 3dView work on to change this, go to the Option then press on “Resolution” and set it lower.

No item

No item

No item