Differences

This shows you the differences between two versions of the page.

--- troubleshooting [2011/10/18 15:30] – [Freestyler Features] Jan_K
+++ troubleshooting [2011/10/20 16:57] (current) – removed Spirit
@@ Line 1: / Line 1: @@
-====== Troubleshooting ======
-==== Freestyler Features ====
-=== Groups ===
-\\
-\\
-== ==
-**Forgotten password.**\\
-If the password has been forgotten then there is only one way to fix that and this is in the registration data base.\\
-\\
-It can be found in windows under Start -> Run -> "RegEdit"\\
- “\HKEY_USERS\...\Software\VB and VBA Program settings \Freestyler \Settings”\\
-There is a “Password” label and this can be edited or deleted.\\
-\\
-But be carefully not to mess anything up because if the registration database are destroyed then it is a new installation of the whole PC.\\
-\\
-\\
-=== Functions ===
-== ==
-**Some Fixures doesn't Blackout.**\\
- - This can happen because the Shutter CH isnt' set correct, so to solve this you have to set the Shutter CH correct with the Fixture Creator.\\
- [[fixture_creator:lamp_configuration|Fixture Creator - Lamp Configuration]]\\
-\\
-\\
-**No "OFF" button for Strobe.**\\
-The strobe are stoped by using the Shutter "Open" or "Closed" Button.\\
-[[fixture_control:lamp_panel|Lamp Panel description]]\\
-\\
-\\
-**Red X icons in the fixture control panels.**\\
-This indicates that no imgae is attached to this DMX value in the DMX tables.\\
-See: [[fixture_creator:gobo_configuration|Gobo Configuration]]. The description of Gobo wheel 3\\
-\\
-\\
-**The Blue Ball don’t move in the movement panel.**\\
-When running Shape the Blue ball don’t move. However monitoring the DMX output for Pan and Tilt it can be seen that these values changes with the shape.\\
-The update of the blue balls position was removed because of some error issues.\\
-\\
-\\
-** "Flip" don't bring the beam to the correct position**\\
-Flip should flip the fixture but keep the beam at the same point.\\
-If the "Range" value is not defined or wrong then the beam will be moved after a flip.\\
-See: [[fixture_creator:movement_configuration|]]\\
-\\
-\\
-=== Cues ===
-== ==
-**Cues turn each other of.**\\
-When more cues are to run at the same time “Cue Multiselect always enable” are to be set on.\\
-Link to multi cue.[[missing please enter when topic is made|]]\\
-Note “Cue Go to previous value always enable” this restore the values when a cue is stopped.\\
-Additional note that the sequences are to be made as Transparent (Transparent Mode).\\
-Link to Seq .[[missing please enter when topic is made|]]\\
-\\
-\\
-**Shape movement stops when cue are turned on.**\\
-It is important to notice that the shape movement is not a stand alone movement generator.\\
-Shape has to be added in a sequence and then into the cue like everything else.\\
-If the shape is not in a cue the it will be turned off when the is started.\\
-Link Add Shape on Sequence.[[missing please enter when topic is made|]]\\
-\\
-\\
-=== Sequences ===
-== ==
-**Number of scenes.**\\
-The max no of scenes / steps in the sequencer was in the version before V3.4 = 15.\\
-From version 3.4 it is 45.\\
-The number can be changed in the file “freestyler.ini” which is in the freestyler folder.\\
-\\
-[NumberOfScenes]\\
-Number=45\\
-\\
-See eventually: [[freestyler.ini|]]\\
-\\
-You can also download "FS configuration tool" [[http://max-baeumle.de/fsconfigurationtool/setup.exe|Click here to Download the FS configuration tool]]\\
-\\
-Disadvantages (Pleas fill in if you know any)\\
-The FreeStyler statup time will be longe\\
-\\
-\\
-\\
-\\
-**Color display on the screen don’t change for the fixture.**\\
-When running with time shorter than 400 the small color display on each fixture don’t change.\\
-This is made so due to graphic handling on slow PCs.\\
-\\
-\\
-**Sequence / Cue override everything.**\\
-Check that the Sequence is made in “Transparent Mode” with not use faders in “Off” mode.\\
-\\
-\\
-=== DMX 400 ===
-== ==
-No item\\
-\\
-\\
-=== Color, Gobo, Beam, Pan/tilt, lamp Window ===
-== ==
-**a window have disappeared**\\
-This can happin if you have draged one of the windows to the second screen\\
-\\
-you can Reset all the windows, Go to Setup->Freestyler setup->Preferences->Extra options
-and Press "Reset Window postions"\\
-==== Freestyler Addons ====
-No item\\
-=== External Control ===
-== Midi Controll ==
-**Midi controll / Freestyler is getting slow**\\
- -This can happin if the Drivers a not Intalled, So Go an install the Drivers from the Midi controller.\\
- -it can also be caused by the Midi output, This means you'r using USB1.0. so to solve this get USB2.0 or Turn off the Midi ouput.\\
-\\
-**My midi device sends a velocity lower then 127**\\
-Go to the Freestyler directory, now open Freestyler.ini with a note pad.\\
-search for:\\
-\\
-[Midi]\\
-Triggervalue=127\\
-\\
-here you can change the Trigger value\\
-\\
-\\
-== Touchscreen UI2 ==
-\\
-=== Magic 3D Easy View & Scanlibrary ===
-**Light doesn't react to the dmx out from freestyler.**\\
-)Be sure you selected the right fixture in Magic 3d.\\
-)did you selected "Virtual interface" as your Interface.\\
-\\
-**Magic 3D view runs Very Slow**\\
-this can be caused by the resolution 3dView work on to change this, go to the Option then press on "Resolution" and set it lower.
-\\
-=== Fixtur Creator ===
-No item\\
-=== Sound To Light ===
-No item\\
-=== SunTriX & LedTriX plugins ===
-No item\\