Differences

This shows you the differences between two versions of the page.

--- tip_of_the_day:2:2 [2014/03/17 08:51] – Jan_K
+++ tip_of_the_day:2:2 [2018/12/27 23:56] (current) – typos, formatting, language Laudrin
@@ Line 2: / Line 2: @@
 **FX**\\
 You can add more FX to the same sequence.\\
+\\
 The next sequence will be added starting from the current step.\\
-This makes it possible to have the generated patterns in parallel or appended.\\
+This makes it possible to let the generated patterns run parallel or after each other.\\
 \\
-Example.\\
+**Example 1:**\\
-Two rows of led-bars are placed with one row in each side of the rig.\\
+Two rows of led-bars are placed with one row in each side of the rig.
-Set the generator to sine waveform and red channel control. This will give let’s say 12 steps in the sequence. De-select the fixtures and select the fixtures in the other side of the rig.\\
+  - Set the generator to sine waveform and red channel control. This will give let’s say 12 steps in the sequence.
-Set the step in the Sequence editor to the first step (Step 1)\\
+  - Deselect the fixtures and select the fixtures in the other side of the rig.\\
-Add cosine to red channel control.\\
+  - Set the step in the Sequence editor to the first step (Step 1)\\
-The sequence is now running with 12 steps where the led bar in one side starts from 0 → full light → 0 and the other side runs from full light → 0 → full.\\
+  - Add cosine to red channel control.
-How will this look in real life?\\
+The sequence is now running with 12 steps where the led bar in one side starts from 0 → full light → 0 and the other side runs from full light → 0 → full.
-It will be a red light slowly fading from one from one side of the rig to the other.\\
+How will this look in real life? It will be a red light slowly fading from one from one side of the rig to the other.\\
 \\
-Another example could be adding Cascade and Cancan after each other.\\
+**Example 2:**\\
-Here it is just first to generate Cascade and then let the step in the sequence editor stay on the last step.\\
+Another example could be adding Cascade and Cancan after each other.
-Shift to Cancan and then generate the pattern.\\
+  - First to generate a Cascade with the FX editor
-The two patterns will now be after each other.\\
+  - Let the sequence editor stay on the last step.\\
+  - Shift to Cancan and then generate the pattern.
+The two patterns will now run after each other.\\
 \\
 More tips: [[:tip_of_the_day|]]\\
 </note>