Differences

This shows you the differences between two versions of the page.

--- submaster [2011/10/13 17:22] – Spirit
+++ submaster [2011/10/19 17:29] (current) – removed Spirit
@@ Line 1: / Line 1: @@
-====== Submaster config ======
-\\
-An other way to load sequences into the cue is to use “Submasters” (SM).\\
-With sub master the sequences are grouped in a cue file and then loaded into a “submaster” select box.\\
-Only one of the sequences in the cue file / “SubMaster” select box can be selected at the time and there by loaded into the Cue List in the cue window.\\
-\\
-Also look at:
-  *[[overview_cue_sequence_relation|]]\\
-  * [[submasters | Using Cues and Submasters]]\\
-\\
-===== Submaster config =====
-\\
-{{:sub_config.png}}\\
-\\
-The "Cog" icon, here you can enable "Start/stop fader control" or add your "Cue".\\
-  *Start/stop fader control, When selected a sequence running will stop when the submaster intensity is pulled
-down to nothing or zero. You will notice that the highlighted sm becomes unhighlighted during this control and
-will start running again and rehighlight when the intensity is pulled above nothing or zero.\\
-If you press with the right mouse button on a Submaster (SM) there will apaear a window with the next content\\
-  * Remove Cue, Removes only the cue from the selected submaster.\\
-  * Clear all Submaster, Clears all the Submasters\\
-  * SM group 1~10\\
-  * Leave speed "as is", the speed will stay how it was if you press Run, instead of going back to 100%\\
-  * Unlink SM Group intensity, this will unlink the Intesity slider. only available if you use SM groups!\\
-You can do this with all the Submasters individual 1~20\\
-\\
-\\
-===== Submaster groups =====
-{{:sub_smgroup1.png}}\\
-\\
-With the submaster groups you can link two Submasters together.\\
-so this means if you press Run on SM1 it will also run SM2, and it's also the same with Intense.1 and 2 if you drag them.\\
-\\
-with "unlink Sm groups intensity" it will unlink the sm intenisty slider so you can controll both the intenity sliders seperate.\\
-\\
-\\
-\\
-----
-\\