Differences

This shows you the differences between two versions of the page.

--- panel_description_beam_panel [2011/10/17 14:21] – Jan_K
+++ panel_description_beam_panel [2011/10/19 16:12] (current) – removed Spirit
@@ Line 1: / Line 1: @@
-====== Panel Description - Beam Panel ======
-\\
-\\
-{{:panel_description_beam_panel.gif|}}\\
-\\
-**Iris:**\\
-Is the size of the beam going from spot to wide.\\
-Some fixtures has some fixed lenses that be added to change the beam size. These lenses can be controlled elsewhere. Normally on the gobo wheel or macro.\\
-\\
-**Focus:**\\
-As the name says focus making the sharp.\\
-\\
-**Zoom:** \\
-Also as the name tell “Zoom”.\\
-\\
-**Prism:** \\
-This move the prism into the beam.\\
-Here it is a fader but normally it is an on / off value where 0% is off and 100% is on. The range in between are not defined.\\
-Prism and Prism rotation are normally related.\\
-\\
-**Prism Rotation:**\\
-This control normally control the rotation direction and speed.\\
-\\
-**Frost:**\\
-There is 2 Frost filter controls available.\\
-Frost filter is normally an on / off value where 0% is off and 100% is on. The range in between are not defined.\\
-\\
-\\
-**Note:** You can add icons for extra features in the Fixture Creator Macro menu.\\
-The 3 “Lenses” icons have be added in the Macro panel and the Show in parameter set to Beam.\\
-By pressing the white “+”  in the green triangle (Down left) in the lamp Panel the extra icons is shown.\\
-For further details see.[[fixture_creator:macro_configuration|Macro configuration]]\\
-\\
-\\
-To configure this panel in fixture creator see: [[fixture_creator:beam_configuration|Beam configuration]]\\
-\\
-\\
-----
-\\