Differences

This shows you the differences between two versions of the page.

--- overview_cue_sequence_relation [2011/07/21 08:33] – Jan_K
+++ overview_cue_sequence_relation [2011/10/19 17:45] (current) – removed Spirit
@@ Line 1: / Line 1: @@
-====== Cue - Sequence relation ======
-\\
-The main tool / function to a light show is the cue.\\
-\\
-A cue consist of sequence which can have a single step or many steps.\\
-Each step represent a scene with settings of the fixtures.\\
-\\
-The cues can be loaded direct from a file. They can also be attached to a “FastCue button” which will load the cue file that are attached direct into list in the cue window.\\
-It will load all sequences in the cue file.\\
-Bellow the cue file CS_01 is attached to a fast cue button. The cue has 3 sequence and these sequence consist of more steps.\\
-The first sequence has first the shutter is closed, then the color is changed, then open the shutter again and so on.\\
-It is just an example.\\
-\\
-An other way to load sequences into the cue is to use “Sub masters”.\\
-With sub master the sequences are grouped in a cue file and then loaded into a “sub master” select box. Only one of the sequences in the cue file / “Sub Master” select box can be selected at the time and there by loaded into the Cue List in the cue window.\\
-\\
-It the figure bellow color are grouped in the same cue file and thereby placed in the same select box. This makes sense because it is not possible, to have a blue and a red color, on the same fixture at the same time also it is not possible have an open and a closed shutter at the same fixture at the same time.\\
-The sequences loaded into the line “no.” corresponding to the select box no.\\
-Select box 1 goes into line 1 and select box 5 goes into line 5 in the cue list.\\
-\\
-\\
-{{:images:cue_overview_01.gif|}}\\
-\\
-\\
-\\
-----
-\\