Differences

This shows you the differences between two versions of the page.

--- ledtrix_-_main_window [2011/03/11 10:24] – Jan_K
+++ ledtrix_-_main_window [2011/10/19 16:39] (current) – removed Spirit
@@ Line 1: / Line 1: @@
-====== LedTeix - Main window ======
-With LedTrix it is possible to control an animated image and a text at the same time.\\
-It is basically possible to select an image, enter a text and control the intensity, speed and so on, of the two parts separately.
-The output to the matrix can be monitored in the “Preview” window.
-{{:ledtrix_main_window_00.jpg|}}
-----
-==== Text ====
-Text entry is to enter text.\\
-Text Font, Style, Font Size and Color can be set.\\
-No text is displayed before pressing the “Set” button
-Note: At this time sizes smaller than 10 are not set / scaled correct.
-There are a direction control. This can either shift the text from “Left to Right” or “Top to bottom”\\
-If the text direction is shifted when it is running then it will hold the position where it is shifted.\\
-In the example above the text will start with 9 and count down.\\
-If direction is shifted when only the part “2 1” is displayed then it is only “2 1” that will be in the display
-The position is rest when the text is set again.
-The example above will be centered around “5 4” when the direction Top to bottom is started.
-==== Macro ====
-As written in the panel “Hold SHIFT and press a button to record current settings”. \\
-When a macro is recorded the F number becomes bold.\\
-The macro will also be present after the Freestyler has been restarted.\\
-Button can be saved and erased by “right click” on it.
-----
-==== Control ====
-===Image===
-----
-** Faders** \\
-There are 2 faders “Master Image” and “Speed”
-** Fade in and Fade out.**\\
-Is an automated way to fade in and out the image with a fixed time rate.
-** Play / Pause ** \\
-This is used to start and pause the animation.
-It is also used to restart the animation after “Tap” has been used or after the setup menu has been closed.
-** Tap ** \\
-“Tap” is used to step the image frame one by one. Each time “Tap” is pressed the next frame is shown.
-** Inverse Image Check-box** \\
-The inverse invert the colors of the image. It is only the image output that are inverted (See Preview window) not the image in the LedTrix main window.
-=== Text. ===
-----
-** Faders ** \\
-There are 2 faders “Master Text” and “Speed”
-** Fade in and Fade out. ** \\
-Is an automated way to fade in and out the text with a fixed time rate.
-** Play / Pause ** \\
-This is used to start and pause the text animation.\\
-It is also used to restart the text animation after the setup menu has been closed.
-=== Master. ===
-----
-There are 1 “Master” fader
-** Fade in and Fade out. ** \\
-Is an automated way to fade in and out the whole matrix with a fixed time rate.
-----
-==== Image general ====
-All LedTrix images are located under the pluin.  c:\FreeStyler\Plugins\LedAnimations\
-It is possible to remove images that you never use or you can generate you own animation gif and then copy it to location above.
-A program like GIMP 2 can be used to make animated gifs.
-It is worth to think of the size of the images because today only 512 dmx channels are available and that limits the matrix size to 170 points or 13 x 13. This means that it is unnecessary to generate a images of more hundred pixels.\\
-Most of the images in the animation folder has size 20x20 or 40x40 but some are 6x6, 10x10, 15x15, 8x14.\\
-As it can bee seen in the figure above only the center of this 20x20 image are displayed on the matrix.