FreeStyler Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== ARC1 + D ======
\\
{{:fixture_creator:tutorial:led_parcan:arc1_d.gif?|}}\\
\\
Enter manufacture name “Chauvet”, Fixture name “ColoradoZoom 4ch” and Select the fixture picture.\\
Enter basic info in the textbox.\\
\\
Enter then Total Channel. Here  in this mode it is 4.\\
\\
Check “on” the CMY and some new control boxes get visible.\\
Check “on” RGB.\\
And enter the Red, Green and Blue Channel.\\
Link to [[fixture_creator:color_configuration|]]\\ 
\\ 
In this mode an intensity channel is also available this is entered in the Lamp control. And to make a shutter function the intensity channel is also added to Shutter channel where full intensity, DMX value 255, correspond to “Open” and DMX value 0 correspond to “Closed”\\
\\
[[fixture_creator:lamp_configuration|]]\\
\\ 
{{:fixture_creator:tutorial:led_parcan:arc1_d_config.gif?|}}\\
\\
Enter the correct Channel description.\\
Add the Locate and default values.\\
See Link [[fixture_creator:channel_description|]]\\
\\
{{:fixture_creator:tutorial:led_parcan:arc1_d_channel_description.gif?|}}\\
\\
Save the fixture with a proper name.\\
See [[fixture_creator:file_name_convention|]]\\
\\
Test the fixture and when it works, export it and upload it to the forum.\\
\\
[[http://www.freestylersupport.com/wiki/extrafiles/Chauvet_ColoradoZoom_4ch.pff]]\\
\\
----
\\
In FreeStyler the will be a lamp and color control panel.\\
\\
{{:fixture_creator:tutorial:led_parcan:arc1_d_lamppanel.gif?|}}\\
\\
Link to [[fixture_control:lamp_panel|]]\\
\\
{{:fixture_creator:tutorial:led_parcan:arc1_d_colorpanel.gif?|}}\\
\\
Link to [[fixture_control:color_panel|]]\\
\\
\\
\\
----
\\