Differences

This shows you the differences between two versions of the page.

--- fixture_control:beam_panel [2011/10/17 19:30] – removed Jan_K
+++ fixture_control:beam_panel [2013/03/11 03:45] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
+====== Panel Description - Beam Panel ======
+\\
+\\
+{{:panel_description_beam_panel.gif|}}\\
+\\
+**Iris:**\\
+Is the size of the beam going from spot to wide.\\
+Some fixtures has some fixed lenses that be added to change the beam size. These lenses can be controlled elsewhere. Normally on the gobo wheel or macro.\\
+\\
+**Focus:**\\
+As the name says focus making the sharp.\\
+\\
+**Zoom:** \\
+Also as the name tell “Zoom”.\\
+\\
+**Prism:** \\
+This move the prism into the beam.\\
+Here it is a fader but normally it is an on / off value where 0% is off and 100% is on. The range in between are not defined.\\
+Prism and Prism rotation are normally related.\\
+\\
+**Prism Rotation:**\\
+This control normally control the rotation direction and speed.\\
+\\
+**Frost:**\\
+There is 2 Frost filter controls available.\\
+Frost filter is normally an on / off value where 0% is off and 100% is on. The range in between are not defined.\\
+\\
+\\
+**Note:** You can add icons for extra features in the Fixture Creator Macro menu.\\
+The 3 “Lenses” icons have be added in the Macro panel and the Show in parameter set to Beam.\\
+By pressing the white “+”  in the green triangle (Down left) in the lamp Panel the extra icons is shown.\\
+For further details see.[[fixture_creator:macro_configuration|Macro configuration]]\\
+\\
+\\
+To configure this panel in fixture creator see: [[fixture_creator:beam_configuration|Beam configuration]]\\
+\\
+\\
+----
+\\