Differences

This shows you the differences between two versions of the page.

--- faq:troubleshooting [2016/10/09 18:21] – additional corrections srb
+++ faq:troubleshooting [2021/05/22 09:42] (current) – [Freestyler Addons] colombo
@@ Line 77: / Line 77: @@
 === Functions ===
 <note>
-**Some Fixtures don't Blackout.**\\
+**Some fixtures don't Blackout.**\\
- - This can happen because the Shutter CH isn't set correctly, so to solve this you have to set the Shutter CH correct with the Fixture Creator.\\
+ - This can happen because the Shutter CH isn't set correctly, so to solve this you have to set the Shutter CH correctly using the Fixture Creator.\\
  [[fixture_creator:lamp_configuration|Fixture Creator - Lamp Configuration]]\\
 </note>
@@ Line 120: / Line 120: @@
 <note>
 **Cues turn each other off.**\\
-When more cues are to run at the same time “Cue Multiselect always enable” are to be set on.\\
+When more cues are to run at the same time “Cue Multiselect always enable” is to be set on.\\
 Link to multi cue.[[missing please enter when topic is made|]]\\
 Note “Cue Go to previous value always enable” - this restores the values when a cue is stopped.\\
@@ Line 144: / Line 144: @@
 <note>
 **Number of scenes.**\\
-The maximum number of scenes / steps in the sequencer was 15 FreeStyler versions before 3.4.\\
+The maximum number of scenes / steps in the sequencer was 15 in FreeStyler versions before 3.4.\\
 From version 3.4 the maximum number of scenes / steps in the sequencer is 45.\\
 The number can be changed in the file “freestyler.ini” which is in the freestyler folder.\\
@@ Line 231: / Line 231: @@
 <note>
-**My fixtures are blacked out using Submasters - in the sequence editor everything works fine**\\
+**My fixtures are blacked out when using Submasters - in the sequence editor everything works fine**\\
 \\
 On the right of each sm is a slider. This is the sm intensity. For the most part you won't need it but any attribute like the 'lamp' that is set to use intensity will need this to be on. It works like a dimmer - the higher it is the brighter the beam. To use it, place the mouse cursor over it and hold the left mouse button. Now you can drag the intensity up and down. You will notice that it turns blue.
@@ Line 366: / Line 366: @@
 \\
 In section "Language for non-Unicode programs" click "Change the system locale" and set "English (United Kingdom)" or US.\\
+\\
+Or use this. https://github.com/xupefei/Locale-Emulator\\
 </note>