Differences

This shows you the differences between two versions of the page.

--- external_control:midi:midi_hack [2013/03/11 04:02] – external edit 127.0.0.1
+++ external_control:midi:midi_hack [2013/04/07 04:37] (current) – lindsayward
@@ Line 2: / Line 2: @@
 okay, I got it working like this:
-when I press "button 1" on my nanokontrol, I can control seq speed 1-5 on encoder 1-5 and submaster 1-5 on fader and the two buttons on 1-5
+  * when I press "button 1" on my nanokontrol, I can control seq speed 1-5 on encoder 1-5 and submaster 1-5 on fader and the two buttons on 1-5
-when I press "button 2" on my nanokontrol, I can control seq speed 6-10 on encoder 1-5 and submaster 1-5 on fader and the two buttons on 1-5
+  * when I press "button 2" on my nanokontrol, I can control seq speed 6-10 on encoder 1-5 and submaster 1-5 on fader and the two buttons on 1-5
-when I press "button 3" on my nanokontrol, I can control seq speed 11-15 on encoder 1-5 and submaster 1-5 on fader and the two buttons on 1-5
+  * when I press "button 3" on my nanokontrol, I can control seq speed 11-15 on encoder 1-5 and submaster 1-5 on fader and the two buttons on 1-5
-when I press "button 2" on my nanokontrol, I can control seq speed 16-20 on encoder 1-5 and submaster 1-5 on fader and the two buttons on 1-5
+  * when I press "button 4" on my nanokontrol, I can control seq speed 16-20 on encoder 1-5 and submaster 1-5 on fader and the two buttons on 1-5
 Just like we want it :D but it was really complex to get it to work and it takes a bit of explanation to tell you guys how I did it,
@@ Line 14: / Line 14: @@
 -------
-READ THIS IF YOU USE A NANOKONTROL OR ANY OTHER MIDI CONTROLLER WHICH CAN'T SEND OUT PROGRAM CHANGE NOTES:: IF IT CAN (like the BCF2000) SKIB THIS.
+READ THIS IF YOU USE A NANOKONTROL OR ANY OTHER MIDI CONTROLLER WHICH CAN'T SEND OUT PROGRAM CHANGE NOTES:: IF IT CAN (like the BCF2000) SKIP THIS.
-if you use the nanokorg you have to open an extra MIDI-OX where the MIDI from the naonkorg enters before the second MIDI-OX. remember to set both MIDI-OX up so the the signal goes through these two before it enters FS
+If you use the Korg nanokontrol you have to open an extra MIDI-OX where the MIDI from the naonkontrol enters before the second MIDI-OX. remember to set both MIDI-OX programs up so that the signal goes through these two before it enters FS.
 Here you have to make one mapping:
 submaster page buttons 1-4 (value 1) when the value2 is 127--> set it to send out program change notes 1-4