Differences

This shows you the differences between two versions of the page.

--- external_control:midi:3xbcf2000_midi_tutorial [2011/11/03 17:08] – [Encoder Pages] Spirit
+++ external_control:midi:3xbcf2000_midi_tutorial [2013/03/11 04:02] (current) – external edit 127.0.0.1
@@ Line 64: / Line 64: @@
 **BCF3**\\
 {{:external_control:midi:tutorial_3xbcf2000_3_note.gif?|}}\\
+\\
+Here you can find more examples:\\
+[[external_control:midi:3xbcf2000_patch_example|3xBCF Example]]\\
 \\
 \\
@@ Line 120: / Line 123: @@
 Encoder 6:\\
 Controller mode. This parameter contains the information of the values send. If it is Absolute or relative values and if it is the extender 14 bits that are send. Default is Absolute which is also what FreeStyler uses.\\
+\\
 In case of buttons this parameter is used to define if it is a toggle or a flash button. It can also be set to an increment button.\\
+FreeStyler will normally run with flash buttons and toggle button functions are generated by Freestyler. Therefore Default set the buttons to flash.\\
+See Bellow for hint on buttons.\\
 \\
 Encoder 7:\\
@@ Line 138: / Line 144: @@
 **Button Table**\\
 {{:external_control:midi:tutorial_3xbcf2000_buttontable_01.gif?|}}\\
+\\
+\\
+**Hints on buttons.**\\
+Buttons can be configured to 3 modes. See bellow.\\
+\\
+Toggle.\\
+This is “Toggle On” mode and means that it keeps it value as until it is depressed again.\\
+Like a light switch. Switch on, stays on until it is switched off again.\\
+\\
+Flash.\\
+This is “Toggle Off” mode and means that it keeps it’s value as long as it depressed. This is like a doorbell. It is only ringing as long as the button is depressed.\\
+\\
+Increment.\\
+In this mode each press will increment the value send with the note. The size of the increment can be set on the encoder for controller option. (Encoder 7)\\
 \\
 \\