Differences

This shows you the differences between two versions of the page.

--- dmx400 [2011/05/17 15:16] – djSupport
+++ dmx400 [2011/10/19 18:09] (current) – removed Spirit
@@ Line 1: / Line 1: @@
-[[welcome|{{:fshome.jpg|}}]]
-======Using DMX400======
-Many people have an external dimmerpack with PARs connected to; most of these people need a separate chaser to control these. That's why there is a built in chaser in Freestyler called DMX400.
-You can even use it with RGB LED fixtures !!!
-Specifications:
-- 4-6-8-12 channel
-- Dimmer / channel
-- Flash / channel
-- Master dimmer
-- Master flash
-- Background
-- Static or chaser modus
-- 9 different chases
-- Can be controlled by sound
-- Fade time
-- RGB support
-Configuration of DMX 400:
-First step is to make sure that you've configured some Pars or RGB fixtures. See add / remove fixtures
-Now right click on the fixture you want to control with the DMX400 on channel 1 and select "Use in DMX400", Freestyler will ask you the DMX400 channel (1-12). Repeat these step for each fixture you want to control with DMX400, but always make sure it has an intensity channel or RGB channels !
-{{:dmx400.jpg?nolink|}}
-The three buttons on the right are only for RGB functionality (Disable color changing, all same color and vivid colors)
-You can use DMX 400 in two modes: Static (no animation) or chaser (animation).
-Each channel has its own intensity, there is a master intensity and a background intensity (always visible).
-To change chaser pattern press the "Program" button, if you want to change pattern after a certain time then press the button under the interval slider and set the desired interval.
-Note: When running sequences at the same time: the chaser only works when in a sequence the corresponding channels are set to" off". If in a sequence the same channels are marked as "Fade" or "Snap" then the sequence has priority and the DMX400 channels are ignored.
-[[welcome|{{:fshome.jpg|}}]]