Page 1 of 1

30x light, one common MIDI DMX channel fader

Posted: 30 Nov 2021, 20:23
by colombo
Good day. Let's have 30x light, which has a strobe channel.
I want to control the strobe channel with a fader via midi. Can be other than via
1) SETUP / MIDI CONTROL / MIDI TO DMX (max. 24 lights x 1DMX channel can be controlled)
2) SETUP / PREFERENCES / PATCH (consequently it is not possible to individually control the DMX strobe channel of individual lights)
3) ???

Re: 30x light, one common MIDI DMX channel fader

Posted: 02 Dec 2021, 08:06
by Partyman
I know that you are wanting to control a midi channel but your explanation is very difficult to translate. What midi controller are you attempting to setup? Do you want a slider for the strobe channel of 30 different lights? 30 sliders that only control strobe channel? Or do you want 1 slider that controls all 30 strobe channels?

Re: 30x light, one common MIDI DMX channel fader

Posted: 28 Dec 2021, 11:28
by colombo
One slider for 30 flash channels

Re: 30x light, one common MIDI DMX channel fader

Posted: 29 Dec 2021, 05:03
by Partyman
Do all lights need to be addressed independently or can they all have same address?
Regardless,
Right click on Freestyler desktop and select groups, create a group with all fixtures, create midi shortcut to strobe channel for that group.
I believe you can do it via command line but not sure of the syntax

Re: 30x light, one common MIDI DMX channel fader

Posted: 07 Jan 2022, 23:30
by colombo
The lights must be addressed independently.

Re: 30x light, one common MIDI DMX channel fader

Posted: 07 Jan 2022, 23:43
by colombo
Unfortunately, I do not define a midi strobe channel for the group.

Re: 30x light, one common MIDI DMX channel fader

Posted: 08 Jan 2022, 22:16
by Partyman
The Shutter is the same as the Strobe channel. You could make a 1 step sequence and use an override Button. You could also make a two step sequence (on/off) set it to snap and lower all times and speeds to their lowest, you can make the speed whatever you want in the cue window. Why a Slider? a button would do what you want then use the slider to adjust speed or intensity. There are many ways.

Re: 30x light, one common MIDI DMX channel fader

Posted: 12 Jan 2022, 10:58
by lightBanana
I have the same problem. One potential workaround could be recreating the fixtures with wrong channel descriptions - swap the intensity and strobe channel. With those fixtures you could use the intensity slider of a submaster to control flash rates. Of course this breakes all other specificially intensity related features like blackout. I would highly appreciate if the submasters would allow to use the slider for other channels which would solve this issue ... the code is there already after all ¯\_(ツ)_/¯

@Partyman What do you mean by "Midi Shortcut"? I couldn´t find it in the FS Wiki.

Re: 30x light, one common MIDI DMX channel fader

Posted: 14 Jan 2022, 06:19
by Partyman
using a midi device to trigger, There is a list of option available in the midi section of setup