Ok, so I have created the 5 fixtures needed.
To Install open the zip and copy the 4 folders to your C:\Program Files\Freestyler\ directory
It will warn you of over-writing folders, say yes.
This will add
1 \Location (open in freestyler, contains a set of 8 GigBar Move lights set to DMX CH1)
Some laser icons needed into the Gobos\Chauvet DJ folder
The .fft fixtures and images to \Fixtures
The .pff fixtures in the \Import folder
This only works if your GigBar Move is set to 35CH DMX mode (Page 15 of your manual or page 21 in the pdf
https://www.chauvetdj.com/wp-content/up ... 1-9-20.pdf)
The moving head Gobo's & Colours are not mentioned in the manual, so random ones have been chosen. I do not have this light to test any of this with.
If you don't add the fixtures in the right consecutive order it won't work.
DMX Fixture
01 Par 1 (Start DMX Channel)
06 Par 2 (Start CH + 5)
11 Derby 1 (Start CH + 10)
14 Derby 2 (Start CH + 13)
17 Laser (Start CH + 16)
20 Strobe (Start CH + 19)
24 Moving Head 1 (Start CH + 23)
30 Moving Head 2 (Start CH + 29)
The below image shows how it should look in 'Add Fixture' and the location file in freestyler. Both images are inside the zip and are not needed by freestyler.
