First time user
Posted: 12 Sep 2008, 22:56
Just received the Enttec Pro and hooked up my lights to Freestyler for the first time. As a newbie I will pobably have a number of questions over the coming weeks (and yes, I've read the tutorials and seen the videos - thanks to all).
First question - I have 4 5-channel Par 64 LED's (no-names) and I created a fixture profile for them and exported into FS. When I hooked up the first par, the "red" channel is backwards - the red LEDS become dimmed by INCREASING the slider/value. The other sliders work appropriately.
To confuse the issue further - when I added another, identical fixture to FS with a different DMX address, and hooked up another LED par with that address, the sliders all work correctly for that par.
So I have 2 identical LED pars installed, at different DMX addresses, and the "red" channel for one is inversed. Any ideas as to why this might happen, and how I can fix it?
J
First question - I have 4 5-channel Par 64 LED's (no-names) and I created a fixture profile for them and exported into FS. When I hooked up the first par, the "red" channel is backwards - the red LEDS become dimmed by INCREASING the slider/value. The other sliders work appropriately.
To confuse the issue further - when I added another, identical fixture to FS with a different DMX address, and hooked up another LED par with that address, the sliders all work correctly for that par.
So I have 2 identical LED pars installed, at different DMX addresses, and the "red" channel for one is inversed. Any ideas as to why this might happen, and how I can fix it?
J