Chauvet Wash FX 2 Topic is solved
Forum rules
A place for you to request fixture files to be created by other users - PLEASE BE WARNED THIS MAY NEVER HAPPEN AS WE ENCOURAGE YOU TO TRY YOURSELF AND WILL GIVE PROMPTS as and when we can. at the END OF THE DAY Creating fixtures isn't easy if we don't have that particular light and an appropriate manual! BE WARNED!
IF YOU HAVE HAD A REQUEST FULFILLED PLEASE MARK THE TOPIC AS SOLVED!
You can now pay for fixtures if you don't want to wait or create your own by going to here http://www.freestylersupport.com/wiki/f ... on_service
A place for you to request fixture files to be created by other users - PLEASE BE WARNED THIS MAY NEVER HAPPEN AS WE ENCOURAGE YOU TO TRY YOURSELF AND WILL GIVE PROMPTS as and when we can. at the END OF THE DAY Creating fixtures isn't easy if we don't have that particular light and an appropriate manual! BE WARNED!
IF YOU HAVE HAD A REQUEST FULFILLED PLEASE MARK THE TOPIC AS SOLVED!
You can now pay for fixtures if you don't want to wait or create your own by going to here http://www.freestylersupport.com/wiki/f ... on_service
-
- Knows how to turn Lights ON
- Posts: 6
- Joined: 15 Dec 2012, 17:40
- FreeStyler Version: 3.5.1
- I Use FreeStyler for: DJ
-
- Moderator
- Posts: 836
- Joined: 16 Nov 2016, 14:24
- FreeStyler Version: 4.1.6
- I Use FreeStyler for: Stage Show
Re: Chauvet Wash FX 2
Attached are the user manual and my attempt at a fixture file.
Please test and provide feedback.
I used the RGB segments feature to control the 6 lasers
Please test and provide feedback.
I used the RGB segments feature to control the 6 lasers
You do not have the required permissions to view the files attached to this post.
-
- Knows how to turn Lights ON
- Posts: 6
- Joined: 15 Dec 2012, 17:40
- FreeStyler Version: 3.5.1
- I Use FreeStyler for: DJ
Re: Chauvet Wash FX 2
Does not work. Thanks
-
- Moderator
- Posts: 836
- Joined: 16 Nov 2016, 14:24
- FreeStyler Version: 4.1.6
- I Use FreeStyler for: Stage Show
Re: Chauvet Wash FX 2
Could you please elaborate? Is the user manual for the correct light? Do you understand how to use the RGB segments? What are the DMX output channel values?
-
- Knows how to turn Lights ON
- Posts: 6
- Joined: 15 Dec 2012, 17:40
- FreeStyler Version: 3.5.1
- I Use FreeStyler for: DJ
Re: Chauvet Wash FX 2
Can't turn light on and off.
Yes correct light
Yes I understand segments
Just doesn't work
Yes correct light
Yes I understand segments
Just doesn't work
-
- Moderator
- Posts: 836
- Joined: 16 Nov 2016, 14:24
- FreeStyler Version: 4.1.6
- I Use FreeStyler for: Stage Show
Re: Chauvet Wash FX 2
Please check the physical configuration of your instrument. The fixture definition I created was for the 28 channel mode. If your instrument is not configured as 28 channel this may be the problem. Also please verify that the address configured in the instrument matches the address specified in Freestyler.
Using the virtual interface I see the expected output on all the DMX channels.
Please paste a snapshot of the OUTPUT window and specify the address range and what you were expecting the light to do.
Using the virtual interface I see the expected output on all the DMX channels.
Please paste a snapshot of the OUTPUT window and specify the address range and what you were expecting the light to do.
-
- Moderator
- Posts: 836
- Joined: 16 Nov 2016, 14:24
- FreeStyler Version: 4.1.6
- I Use FreeStyler for: Stage Show
Re: Chauvet Wash FX 2
Another question. Were you testing using a submaster? If so was the intensity fader in the submaster moved higher than 0?
-
- Knows how to turn Lights ON
- Posts: 1
- Joined: 18 Jan 2020, 15:35
- FreeStyler Version: 3.4.6
- I Use FreeStyler for: DJ
Re: Chauvet Wash FX 2
Hello!
Van a Chauvet wash fx2 8Ch vezérlés?
Köszi
Van a Chauvet wash fx2 8Ch vezérlés?
Köszi

-
- Moderator
- Posts: 836
- Joined: 16 Nov 2016, 14:24
- FreeStyler Version: 4.1.6
- I Use FreeStyler for: Stage Show
Re: Chauvet Wash FX 2
Csatlakoztatva egy rögzítőleírás a 8 csatornás üzemmódhoz.
You do not have the required permissions to view the files attached to this post.
-
- Knows how to turn Lights ON
- Posts: 1
- Joined: 30 Nov 2020, 22:54
- I Use FreeStyler for: DJ
- Instagram: djrowdykep
Re: Chauvet Wash FX 2
im only getting 1 pixel to control