Support Forum

Hi

had a search but can't find this light profile . has anybody got it or can someone put one together .

ive included the manual for it

says 10 or 14 channels . not much between them so 10 would be fine .

thanks

Attached is my attempt for the 10ch mode.

The manual did not specify so I may have the RGBW channels incorrect. Please let me know.

The following helpful programming windows are available (top menu Window -> All)
Lamp
Macros
Colors
Custom Sliders

Your feedback will be appreciated.

Hi
thankyou i will check this out

Ok
colours are the reverse on the 2nd tower

Red opposite white
green / blue
blue / green
white / red

That complicates things a bit.

In order to control the color properly in Freestyler you will need to use the 14 channel mode.

You will need to physically change the configuration of the instrument to 14 channels.

Attached is a fixture definition for the 14 channel mode.

I used the RGB segments feature so that you will have individual control of each lamp. In the Colors window note the check boxes in the lower left corner. The two on the right side, in the vertical column, tell Freestyler which bank to control. You may check either or both (or un-check both). This allows you to use the color pallet.

Again, I may not have the colors correct. Please check by using the standard Freestyler sliders:
Bring the dimmer channel (channel 4) up full
One at a time slide the 8 lamp controls all the way right - note the color - then all the way left. (CW is white). The lamp color will hopefully match the text of the slider. If not please note which slider controls which lamp and let me know - I'll fix the definition.

Internet issues. Hopefully file will attach.

ok many thanks will test out again and report back