lighting effect with LED
-
- Starting to get to grips with FreeStyler
- Posts: 25
- Joined: January 1st, 2015, 3:25 pm
- FreeStyler Version: 3.45
- I Use FreeStyler for: Theater
- Contact:
lighting effect with LED
good morning. I am looking for how to remove or mitigate the ignition effect on 64 led.Je to explain when the PAR64 is extinguishes and I turn it on it goes from 0 at power too quickly there not to like ny projo of a progresive trad climb when the power is tension.Voila thank you answer me to give us your tricks to get around is problem with LED
Last edited by lobelzar on August 23rd, 2015, 10:25 am, edited 1 time in total.
-
- Starting to get to grips with FreeStyler
- Posts: 25
- Joined: January 1st, 2015, 3:25 pm
- FreeStyler Version: 3.45
- I Use FreeStyler for: Theater
- Contact:
Re: effet allumage avec led
good morning. I am looking for how to remove or mitigate the ignition effect on 64 led.Je to explain when the PAR64 is extinguishes and I turn it on it goes from 0 at power too quickly there not to like ny projo of a progresive trad climb when the power is tension.Voila thank you answer me to give us your tricks to get around is problem with LED
-
- FS is my life
- Posts: 253
- Joined: April 9th, 2012, 10:27 pm
- FreeStyler Version: 3.5.7
- I Use FreeStyler for: DJ
- Contact:
Re: lighting effect with LED
0 to 100% (or 100 to 0) in a 100ms fade?
-
- Starting to get to grips with FreeStyler
- Posts: 25
- Joined: January 1st, 2015, 3:25 pm
- FreeStyler Version: 3.45
- I Use FreeStyler for: Theater
- Contact:
Re: lighting effect with LED
Hello, I do not understand 100ms fade ????
I think of 0to 100
I think of 0to 100
-
- FS is my life
- Posts: 253
- Joined: April 9th, 2012, 10:27 pm
- FreeStyler Version: 3.5.7
- I Use FreeStyler for: DJ
- Contact:
Re: lighting effect with LED
100ms = 1/10th of a second fade from zero to full power, instead of an instant snap.
Or longer, 200ms would produce a slightly more gradual version of the same thing.
Or longer, 200ms would produce a slightly more gradual version of the same thing.
-
- Starting to get to grips with FreeStyler
- Posts: 25
- Joined: January 1st, 2015, 3:25 pm
- FreeStyler Version: 3.45
- I Use FreeStyler for: Theater
- Contact:
Re: lighting effect with LED
ok but in 200ms or display crteate sequence or the fixture
-
- Knows how to turn Lights ON
- Posts: 3
- Joined: September 23rd, 2015, 4:40 pm
- I Use FreeStyler for: Nightclub Lighting
Re: lighting effect with LED
Hello!
perhaps a bit too late but yes if you want a progressive On or progressive OFF effect you have to use the fade function.
- First case : light from 0 to 100% :
create a scene where you set the chanel parameter on FADE (not OFF, not SNAP) and then apply a value of 255 (100%)
- Second case : light from 100% to 0 :
create another scene where you set the chanel parameter on FADE (not OFF, not SNAP) and then apply a value of 0.
Now create a sequence with these two scenes. You can select independently and for each scene the fade time and scene time (if you want a complete fade on the whole scene time, you may choose a fade time = scene time)
Now play the sequence, your light should fade ON and fade OFF.
Note : Freestyler doesn't display the fade value in real time, you will only see the value you set for each scene (so you will see 255 for the first scene, and 0 for the second one).
Hope I helped you!
Crok'
perhaps a bit too late but yes if you want a progressive On or progressive OFF effect you have to use the fade function.
- First case : light from 0 to 100% :
create a scene where you set the chanel parameter on FADE (not OFF, not SNAP) and then apply a value of 255 (100%)
- Second case : light from 100% to 0 :
create another scene where you set the chanel parameter on FADE (not OFF, not SNAP) and then apply a value of 0.
Now create a sequence with these two scenes. You can select independently and for each scene the fade time and scene time (if you want a complete fade on the whole scene time, you may choose a fade time = scene time)
Now play the sequence, your light should fade ON and fade OFF.
Note : Freestyler doesn't display the fade value in real time, you will only see the value you set for each scene (so you will see 255 for the first scene, and 0 for the second one).
Hope I helped you!
Crok'
-
- Knows how to turn Lights ON
- Posts: 2
- Joined: October 13th, 2015, 9:15 am
- FreeStyler Version: 1
Re: lighting effect with LED
ok but in 200ms or display crteate sequence or the fixture
The 16th China International Lighting Fair (Autumn Fair) will be held from 22-26 October, 2015 at the Guzhen Convention and Exhibition Centre in Zhongshan City, Guangdong Province.
-
- FS is my life
- Posts: 253
- Joined: April 9th, 2012, 10:27 pm
- FreeStyler Version: 3.5.7
- I Use FreeStyler for: DJ
- Contact:
Re: lighting effect with LED
100 or 200ms is the fade time. It is in the sequence editor.