Support Forum

OK, I've been through the process and created a fixture file. Now having the same problems as many others in that the common uDMX drivers don't work with windows 7 64 bit. Is there a source for the correct drivers out there? Obviously can't test the fixture file without the drivers working.

I have had same problem, windows installs driver and tell this is unsigned driver.
When windows is starting try pressing F8 key and there should be boot menu with option, allow unsigned drivers, or something similar, near bottom of the list.
i have choose this option and driver now works.

I recommend below ArtNet to DMX interface and give up the uDMX.

http://hz.aliexpress.com/store/product/ ... 20451.html

solution is easy. its a driver signature issue .. then you load it throught device manager and brows your own desk top and the drivers files in the folder you placed it in..

Easiest solution is to download Zadig http://zadig.akeo.ie/

This will get around the signature issue without the need to put the PC into test mode or any of that business.

Load Zadig, select the win32 USB drivers on the uDMX interface and load the driver. Simple as that.

I have tested and had this working on both Win7 32bit, Win10 32bit and Win10 64bit. The interface is stable for a 5hour show running 6 lights.

Sent the instructions to a fellow mobile DJ on mobile DJ forum on Facebook on Saturday after he'd spent a day fruitlessly trying to get it to work, 30 mins later I get a message it was up and running.

Carl.

Illutzmination made drivers for both 64 and 32 bit system. Use the LibUSBK Driver. An installer is even present in the zip.

http://www.illutzmination.de/udmxdriver.html?&L=1