Support Forum

Hello Everybody.

One little question.

I´ve got 4 Elation Design Wash with 16 DMX-Channels.

Every Wash has got it´s own DMX-Range. 1: 1-16, 2: 17-32 and so on.

Is it able to programme a Masterfader for the Dimmer Function, which is controlled by one fader on the BCF2000?

I thought about to patch all Dimmer-Channels of the Washes to one channel e.g. 100 an configure it directly (Midi to DMX) to one BCF fader. So it should be possible to control the Dimmer-Channel of all Washes with one BCF-Fader.

Or is there the possbility in setup, like the PAN-Tilt? These Channels could be controlled with one Fader.

I´ve got the theme problem with my 8 RGBA PARs. There should be also the possibilty to fade the intesity with one Fader on the BFC.

It´s unfortunately not possible to do this only with submasters because the fader should work with higher priority to change the intensity although a submaster is running.

Thank you very much for support.

Markus

Try submasters, you should be able to accomplish exactly what you are wanting by putting your cues into submasters.

Rusty

Create a Group with them all then control the intensity for the group.

Create a Group with them all then control the intensity for the group.

Good morning.

With submasters it should be possible, but so I have to create several subs. Until 4 Subs for each pair of PAR64 RGBW to set the colours and one sub to set the itensity level of all PARs?

Then I created a group with the 4 Washes, like buttza means. Now it is possible to choose all 4 Devices and set an Blackout (Blackout Group 1). But where can I set the intensity level. Blackout is too fast... I can´t find the

Thank you very much for supporting me and have a nice day.
Markus