Page 3 of 3
Re: Connection Problems: Software and Help
Posted: May 2nd, 2015, 7:21 am
by TulioAgustin
Re: Connection Problems: Software and Help
Posted: July 20th, 2015, 10:19 pm
by m8ichael
Hi,
I am running freestyler 3.5.9 and I am not able to connect via the android app.
If I check the connection with the tool I get the following output:
1: FreeStyler Running
2: Computer Accepting LOCAL Connections on Port 3332
3: local server ip address is 10.20.1.9,192.168.41.1,192.168.21.1
4: Windows firewall Running: True
5: Windows firewall freestyler Found: False
6: Windows firewall port open: True
When I run the tool, in the upper left of freestyler the remote icon appears.
What's wrong with my settings?
Re: Connection Problems: Software and Help
Posted: July 25th, 2015, 11:47 am
by Mattotone
I find it strange you have Three ip address? i believe freestyler can only bind to one ip address,
Re: Connection Problems: Software and Help
Posted: August 24th, 2015, 5:36 pm
by MDAR
Hi
I'm trying to trigger some events in FreeStyler X2 from an OpenRemote home automation configuration.
With the help of your tool I've solved the initial correction problems I was having, but I've hit a brick wall when it comes to formatting the commands in OpenRemote.
As you can see from the screen grabs here, I've got quite a few options.
I've tried using all 3 of the http styles,
Post
Get
Put
But nothing happens in FreeStyler, other than the remote control icon appearing.
(Which I clear between tests)
So I'm assuming I have to use a user name & password?
Or do I have to structure the TCP commands in a very particular way?
Really all I want to do is toggle some chases / sequences.
Any help you can give would be very welcomed.
.
FYI,
I've got a TCP controlled Relay board that uses the following commands, that works very well