Support Forum

Hey there!

I plan to buy some scanners, and i want if fx. scanner #1 is on channel 1 - 5 and #2 is on 6 - 10, then i want scanner #2 to use the same DMX values as scanner #1, and then invert pan on #2.

If you understand what i mean?

So that i only make a sequence for #1, and then the #2 just copies the signal of the #1, and then inverts the pan.

Is this natively possible with Freestyler?

I don't think so. Inverse Pan is in Fixture menu, not in sequence builder, so it inverses Pan permamently and only when you check it. I don't see any possibilities to switch it in sequence, but maybe there is someone who knows how to did it.

hi what do you mean with "and i want if FX"

but yes you can invert the pan or tilt

if you Create a Pan/tilt sequence..Both the scanner will do the same..
now if you press right mouse button on the 2nd Fixture you can enable Invert pan or tilt.

you can also use the FX generator..and if you Enable "distibute evenly" it will look like one fixture is Inverted because you only use 2 fixture.

/spirit

I found out how to do it, thanks