Page 1 of 1

Optimising EV3D and FS for playback on PC

Posted: 28 Dec 2012, 08:51
by Uriahdemon
Hi,

I have setup FS and EV which is working but very slow and clunky. I have brought down the rendering mode to normal and the resolution to medium.

I have this setup on another (older and less well equipped) PC and it is working OK. The particular PC I am trying to set up is much newer with greater CPU and RAM but it is still very clunky.

I am running Win 7.

Re: Optimising EV3D and FS for playback on PC

Posted: 28 Dec 2012, 12:55
by Spirit
hi

i also run EV on a Very good pc and still cant set everything on HIGH!

pc specs, AMD Ahtlon FX 6200 (6x3,2GHZ) with 8GB ram
ATI 6870X2 CrossFireX with 2x1 GB GDDR 5 SDRAM 256Bit
2x SSD RAID 0, READ = 600MB/s WRITE = 600MB/S.
1200W PSU
and watercooled CPU... 28 Degrees Idle 35 Degrees Stress...


i can play battlefield3 on ULTRA high Grahics but EV3d View not :(

i think you need 8x Nvidea tesla Card to run it on HIgh mode only it cost more then 10,000 Dollars..

/spirit

Re: Optimising EV3D and FS for playback on PC

Posted: 29 Dec 2012, 08:32
by Uriahdemon
Thanks Spirit,

I have an older less capable PC set up which works as good as I need it. I have duplicated the settings from this onto another higher spec PC but cant even get the same performance as the less capable PC.....??

Rgds Mac