Support Forum

Hi,
I need is to create a fixture with 12 gobo wheels. Each wheel wil have only 2 gobos. Does anyone has an idea of how to achieve that?
Regards,
Elton Pimentel.

Hi, what is the name of the fixture and can you attach the manual please...??

hi
no it isnt Possible to create a Fixture with 12 Gobowheels...
i WOuld use the Macro's to do this but i cant give you a Link from the wiki
because its Offline for somedays to add new Updates

/spirit

Dear Uriahdemon and Spirit,
I do have the manual bu it is in portuguese. The fixture is a 4 pixel RGB board from Lumikit.
The idea is not to use it as RGB board, but as a relay controller board. I can achieve that by adding a relay on each LED color output (12 at all). I have the skills to do that. What I need to do is to send 0 or 255 from channels 3 to 14.
I can do that using macros but doing it this way I would never know if a relay is on or off because its going to be no visual indication of that.
I can think in some solutions, but all of them would need a software changes. If I could have 12 gobo wheels, the problem could be solved. Another solution could be the division of the device in 4 different ones, each one having the same address but starting from a different channel number (ie fixture 1 channels 3 to 5, fixture 2 channels 6 to 8 and so on).
If you have any ideas, please share.
Regards,
Elton Pimentel.

Hej guys I posted an answer on the other thread.

viewtopic.php?f=8&t=4682


But please continoue here on this one instead of the one that I posted in.



/Jan