Support Forum

Hi,

On reading a few forums for the control of moving heads (I only have two) it mades sense to take the advice and address both of them as the same. I would like to on a few sequences set up the heads to react differently i.e. set up on a cross over above the stage or on the drums etc. I have now set up a number of chases/cues/sequences and I was wondering how to get them to act independently on pan and tilt only. I have read the forum and the wiki but cant seem to get the answer. I have tried right clicking one of them and inversed the pan and tilt but that does not seem to make much of a change.

Thanks in advance as always. Rgds Mac

The only way to gain independent control of each fixture is to address them separately. Depending on the moving heads you have, you might also be able to invert the pan/tilt response on one of the fixtures itself (in its settings, not in Freestyler) so that they always move in mirror image with each other, but that still won't give you individual control.

What model moving head? Some of the more professional ones have inverse for pan and tilt built into them.