Page 1 of 1
NanoKontrol2 - Fader makes Intensity Jump to 100&
Posted: 09 Aug 2012, 05:46
by spankthafunk
When assigning Submaster1 Intensity to my NanoKontrol2 fader, it works perfectly. EXCEPT once I stop moving the fader, the intensity jumps to 100%. Even if I drop the fader to 0. Am I missing something?
I'm not using MIDI OX yet, wasn't sure if I needed that because I'm only using the one controller and everything seems to be working great so far.
Re: NanoKontrol2 - Fader makes Intensity Jump to 100&
Posted: 09 Aug 2012, 23:54
by spankthafunk
Any ideas?
Does this happen with other MIDI controllers or just the nano?
Do I need midi ox if I'm only using one controller?
Re: NanoKontrol2 - Fader makes Intensity Jump to 100&
Posted: 10 Aug 2012, 02:53
by spankthafunk
I thought it was the controller doing this but it seems to be Freestyler when I use the SMs. hmm...
Re: NanoKontrol2 - Fader makes Intensity Jump to 100&
Posted: 10 Aug 2012, 17:02
by Spirit
no i dont think its Freestyler because i use freestler with the BCF2000 and i dont have this issue.
/spirit
Re: NanoKontrol2 - Fader makes Intensity Jump to 100&
Posted: 10 Aug 2012, 19:25
by spankthafunk
It was because I was making the cues not have a fade time in the sequencer ( i think thats what its called)
I checked the button to remove fades on the far right hand side, and forever reason it was snapping back to 100%. I ended up unchecking the box so I have fade times again, and just made the percent like 999% so it snaps. I dont want it to fade but havent figured out a workaround for this yet.
Re: NanoKontrol2 - Fader makes Intensity Jump to 100&
Posted: 10 Aug 2012, 19:46
by Spirit
on the cue window you have all the little icons next to a Sequence.
the far right one calls "Disable Fades" this will remove all the fades that will be playedback on that Playback line.
/spirit
Re: NanoKontrol2 - Fader makes Intensity Jump to 100&
Posted: 10 Aug 2012, 21:44
by spankthafunk
Yea that's the one that was causing it to snap to 100%
A blue icon with a squiggly line I think. Not sure not in front of it right now
Re: NanoKontrol2 - Fader makes Intensity Jump to 100&
Posted: 11 Aug 2012, 09:45
by Spirit
ohh if i rember it right there have bean a Bug with the SMslider if you playback a Sequence with Snap.
i allready run the latest beta from the devolper so i dont have it any more.
/spirit
Re: NanoKontrol2 - Fader makes Intensity Jump to 100&
Posted: 13 Aug 2012, 07:25
by spankthafunk
When is the new release coming out?
I can't make a decent on off "strobe" chase for my 3 channel leds without this feature working properly. If I disable the fade times, the intensity snaps to 100% on my SMs. If I leave fade times enabled and crank the speed all the way up, I still get a smooth fade. I want a snap on off on off etc...
Any suggestions?
Re: NanoKontrol2 - Fader makes Intensity Jump to 100&
Posted: 13 Aug 2012, 17:00
by spankthafunk
Duh.
I wasn't setting them to SNAP in the sequencer, they were set to fade.
Eventually after hours of playing around with the software I figure my own answers out. Haha.