Dear all,
I have a problem with my Martin Roboscan 1220 RoGo which I would like to control with FreeStyler 3.3.2. I have the Martin DMX Interface and set the product selection to support the Martin Roboscan 1220 RoGo (see page 4 in the German version of the Martin DMX-Interface manual). However, I have no clue what to set DMX-LINK to. I use the DMX4ALL Nano and I have 8 Trackspots and have no problem to control these devices with FreeStyler 3.3.2 and the DMX4ALL Nano. Unfortunately, I've had no luck to get my Martin Roboscan 1220 RoGo up and running with my current setup so far. In addition, I tried with both fixtures (Roboscan 1220 CMYR and Roboscan 1220 XR). Do I need to write my own new fixture for the 1220 RoGo or can I use one of them?
Any suggestions are highly apprechiated.
DMX4ALL device: http://www.dmx4all.de//DMX4ALL-PC-Inter ... ::545.html
Martin DMX-Interface manual: http://www.martin.com/service/downloadf ... pdf&cat=65
Martin DMX-Interface manual (German): http://www.martin.com/service/downloadf ... pdf&cat=65
Best wishes,
Simon
FreeStyler 3.3.2 with Martin Roboscan 1220 RoGo
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
minders1
- Knows how to turn Lights ON
- Posts: 2
- Joined: 10 Apr 2011, 17:44
- FreeStyler Version: 3.3.2
- I Use FreeStyler for: Film
-
LJ_krede.dk
- Moderator
- Posts: 1028
- Joined: 29 Oct 2007, 20:01
- FreeStyler Version: 3.3.7
- I Use FreeStyler for: Where do I start?
Re: FreeStyler 3.3.2 with Martin Roboscan 1220 RoGo
some martin products have another polarities in the DMX IN and OUT... maybe you have to make a cross cable to get the roboscan to work proberly... check the manual
/LJ_krede.dk
Aalborg, Denmark
Moderator, Supporter and Bug report manager for the FreeStyler community
Found a bug? Submit a Bug Report
Aalborg, Denmark
Moderator, Supporter and Bug report manager for the FreeStyler community
Found a bug? Submit a Bug Report
-
minders1
- Knows how to turn Lights ON
- Posts: 2
- Joined: 10 Apr 2011, 17:44
- FreeStyler Version: 3.3.2
- I Use FreeStyler for: Film
Re: FreeStyler 3.3.2 with Martin Roboscan 1220 RoGo
Hi LJ,
Yes, this is correct. I had to make a cross cable.
In addition, I was able to define a fixture which works for the Martin Roboscan 1220 RoGo which is in some countries also called Martin Roboscan 1220 IIR.
I have attached the fixture and any feedback would be highly appreciated.
Kind regards,
Simon
Yes, this is correct. I had to make a cross cable.
In addition, I was able to define a fixture which works for the Martin Roboscan 1220 RoGo which is in some countries also called Martin Roboscan 1220 IIR.
I have attached the fixture and any feedback would be highly appreciated.
Kind regards,
Simon
You do not have the required permissions to view the files attached to this post.
-
Spirit
- Pro Supporter! (Moderator)
- Posts: 1421
- Joined: 10 Jul 2010, 20:55
- FreeStyler Version: 3.5.9
- I Use FreeStyler for: Nightclub Lighting
Re: FreeStyler 3.3.2 with Martin Roboscan 1220 RoGo
PLease upload the .Pff file
Fixture creator->File->Export
Fixture creator->File->Export
AMD FX-6100 (3.6ghz)x6, Nvidia 770GTX 4GB, 8GB Ram,ROG MB, enttec Pro, Open enttec, Velleman, T2250MTS-B1 22"touchscreen, Ilyama 23" screen, scans, dimm, rgbled, laser, soundsystem Just a drive-in show. Live and Dance