Support Forum

Hello,
I've a few Eurolite KLS-800 units (LED 4-bar) but i cannot find the fixtures for it in the library.
it uses 15 DMX adresses:
ch1 000-009 off, 010-255 some preinstalled programs.
ch 2 master dimmer 000-009 off 010-255 dimming from 0-100%
ch 3 Strobe function 000-009 off 010-255 flash with incresing speed..
ch 4 Spot 1 RED 000-255 dimming from 0-100%
ch 5 Spot 1 GREEN 000-255 dimming from 0-100%
ch 6 Spot 1 BLUE 000-255 dimming from 0-100%
ch 7 Spot 2 Red 000-255 dimming from 0-100%
ch 8 Spot 2 Green 000-255 dimming from 0-100%
ch 9 Spot 2 Blue 000-255 dimming from 0-100%
ch 10 Spot 3 Red 000-255 dimming from 0-100%
ch 11 Spot 3 Green 000-255 dimming from 0-100%
ch 12 Spot 3 Blue 000-255 dimming from 0-100%
ch 13 Spot 4 Red 000-255 dimming from 0-100%
ch 14 Spot 4 Green 000-255 dimming from 0-100%
ch 15 Spot 4 Blue 000-255 dimming from 0-100%

Where can I find the fixtures for these Eurolite KLS-800 (four) spots sets for the library? I've tried using "Fixture Creator", but I am not good, and I am having problems in controlling the separate four spots and above all choosing the color from a "color tool/chooser/picker/palette" of each spot from FS.

Can anyone help me? It will be extremely appreciated.

Thanks a lot in advance and have a nice day!

Oke you need to make 2 Fixtures.

First Fixture you need to make 3channels, 1/2/3
Ch1= some preinstalled programs.
ch2= Master dimmer
ch3= Strobe/Shutter channel

Second Fixture is also 3 channels
Ch1= Red
Ch2= Green
Ch3= Blue

Oke now you need to add it to freestyler
you do it like this
Fixture1 (ch1/2/3) -> Fixture2 (ch4/5/6) -> Fixture2 (ch7/8/9) -> Fixture2 (ch10/11/12) -> Fixture2 (Ch13/14/15)
i hope this helps.

Hi dorrimoldi

You can download a beta i have put together from the PDF manual below

Eurolite KLS-800 DMX Configuration PDF: http://download.showtechnic.de/data/doc ... 054255.pdf

Its different to how Spirit has explained you could do it download that to get you started and play around with it

Hope This Helps http://www.freestylersupport.com/fsforu ... =71&t=3265

and above all choosing the color from a "color tool/chooser/picker/palette" of each spot from FS

the explantion i give, it does precise what he want.

THANK YOU!!!!!!! ))))