Page 1 of 1
NanoKontrol Question
Posted: 18 Jun 2010, 15:56
by jsnmllr1981
Hello, just to let you guys know, I am new at this so if my terminology is off, sorry...
Ok on with the question: Is there a way to use 5 of the nine knobs at the top of the NanoKontrol to select what Sequence to use in which ever submaster page is open?
Re: NanoKontrol Question
Posted: 19 Jun 2010, 09:20
by LJ_krede.dk
the feature you want dont exist in FS. However you use MIDIOX to get it to work. I tried it with the BCF2000 but it is hard to do and don't work very well
Re: NanoKontrol Question
Posted: 20 Jun 2010, 21:29
by dmxlighting
jsnmllr1981 wrote:Hello, just to let you guys know, I am new at this so if my terminology is off, sorry...
Ok on with the question: Is there a way to use 5 of the nine knobs at the top of the NanoKontrol to select what Sequence to use in which ever submaster page is open?
There is not really a way to do it but you can do what you want using other features on the nano. First off make sure you have read and understood the submaster tutorial -
http://www.freestylersupport.com/fsforu ... 19&p=11662
Once you have got that down come back and I'll point you at what to look at with the midi side of things