Support Forum

hello

another light i'm trying to work out the fixture for... (Miltec) MTC 250 Wash

i just can't seem t get the shutter/strobe settings right. if anyone could take a look at the attached .pff file and let me know where i'm going wrong it would be greatly appreciated

thanks in advance
m

p.s.i got the following info from Miltec (http://www.miltec.org.uk) should it be needed


CHANNEL 1
COLOUR WHEEL
0-16 open
17-33 red
34-50 yellow
51-67 purple
68-84 green
85-101 orange
102-118 blue (dark)
119-135 pink
136-255 scroll
slow-fast


CHANNEL 2
STROBE
0-14closed
15-29 open
30-250 strobe
slow fast
251-255 open


CHANNEL 3
DIMMER
0 closed
255 open
gets brighter

hi onge

thanks very much for this.

the shutter/strobe channel were the wrong way round with the intensity, i've changed these settings and it is now working 100% after testing

.pff file attached to this post and also a post also created in 'user created downloads'

thanks again
m