3.2 stable
Posted: 17 Oct 2009, 20:35
3.2 stable has now been released by raph.
it has been tested by many beta testers, and is said to be stable. As allways backup your files/shows before installing and test the features before you go live.
Version 3.2 (released 16-10-2009)
New Features
* Master intensity: Virtual dimmer for LED fixtures without intensity channel.
* Ability to add a background to the touch interface n°_2: just place a background.bmp in the following directory: images\touch\
* Extra info about fixtureprofiles visible : If you click on a fixture in the fixturelist FS will show the creation date, changed date,... at the bottom left.
* Next/previous color for led fixtures: you have midi and keyboard shortcuts for next/previous color, this worked for traditional fixtures (scans and movingheads) but RGB fixtures did not react.
* Default values for fixtures added - in the fixture creator
* Selection order in Fanning added
* Added midi and keyboard function: "Disable tap/manual trigger"
* New sound to light module !!! (Thanks to Remco, check out his website for updates http://www.digiplay.nl/fs/)
* Search function in fixture list
* Disable/enable tap sync/manual trigger per sequence
* Disable/enable all fades in a sequence
* Added support for Enttec wings
* Added "Flip" function for movingheads (pan/tilt ranges can be configured with the Fixturecreator)
* Output refreshrate can be changed
* Low and high limit can be set: rightclick on a slider at the right, in the final release I added the same options in the output view and added a "Remove limits" function.
* Added two plugins: Suntrix and Ledtrix
* Several enhancements
Improvements:
* Some speed improvements in the override buttons
* Change made in the behaviour of the Tap sync: first and second tap will trigger the sequences.
* Added print function to print a list of you fixtures
* Output view will show channels with settings on a red background, at the bottom you can read the actif settings for that channel.
* Extra control added to the touch interface n°_2: Encoder wheel. (automatically selected depending on function)
* Security added to touch interface n°_2
* Some small enhancements in the Enttec wing code
* Changed Fixturecreator open dialog
* Tweaked FadeTimer
* FX engine: shutter chase compatible with led fixtures (intensity channel must be configured)
* FX engine: color chase compatible with led fixtures.
* MIDI notes editable without connected controller
* Added dialog when exiting sequence creator "save first?"
* FX are applied to fixtures in selection order
* MIDI "control change" message fix (BCF2000,...)
* FX window made smaller
* Realtime mode (scheduler) starts when freestyler starts (if configured)
* New commandline added (compatible with Enttec program wing)
* Create sequence: initial values change
* Fades are automatically disabled at high speeds
* Refresh fixture list button
* Added some extra keyboard and midi functions
* Changed the way sequences can be made during a show, 3D viewer shows the created sequence.
* Process has now high priority
* Extra FX were added
* Velleman interface output tweaked
* Touchscreens are from now on always on top
Bugs fixes:
* Bug fixed in override buttons: shapes got disabled when a second button was enabled
* Bug fixed in cue: Shapes didn't work LTP
* Bug fixed in override buttons: transparancy worked in the wrong order
* Some more small bug fixes and improvements in the cue
* Bug fixed in create sequence window: preset fade channels were not played
* Bug fixed in preset editing
* Bug fixed in pan/tilt keyboard shortcuts
* Bug fixed (if a fixture name was altered and ENTER was pressed FS became corrupt)
* Bug fixed in DMX400 if master intensity was less than background intensity.
* Bug fixed in master intensity when intensity and shutter channel are shared
* Bug fixed in cue (tilt channel of the latest fixture not working in some cases)
* Some bugs fixed when creating a sequence
* Intensity label bug fixed
* Bug fixed: FS crashes if the interface wasn't connected
* Ignore master intensity bug fixed
* Default installation folder has been changed to c:\freestyler (issues with Vista and Windows7)
* Bug fixed in macro window
* Issue with Submasters and manual trigger / tap sync fixed
* Some bugs in the FX window
* Bug fixed in cue (tap state not saved correctly)
* Create directory issue fixed
* Preset values not changed when edited or applied fixed
* Some fixes for netbook use
* Bugs fixed in Enttec Wing system
* Compact view bug fixed
* Fixed 100% cpu at first run
* Bug fixed in shape system
* Bug fixed in cuelist and overridebuttons (captions on buttons not changing)
* Bug fixed in "Loop all sequences"
* Bug fixed in MIDI override buttons: Flash buttons sometimes got stuck
* Bug fixed in touchscreen (cuelist and override tabs)
* Bug fixed in external control system: if a fader was touched without a fixture been selected FS crashes.
* Option added to increase process priority (previously on some systems FS didn't start the first time)
it has been tested by many beta testers, and is said to be stable. As allways backup your files/shows before installing and test the features before you go live.
Version 3.2 (released 16-10-2009)
New Features
* Master intensity: Virtual dimmer for LED fixtures without intensity channel.
* Ability to add a background to the touch interface n°_2: just place a background.bmp in the following directory: images\touch\
* Extra info about fixtureprofiles visible : If you click on a fixture in the fixturelist FS will show the creation date, changed date,... at the bottom left.
* Next/previous color for led fixtures: you have midi and keyboard shortcuts for next/previous color, this worked for traditional fixtures (scans and movingheads) but RGB fixtures did not react.
* Default values for fixtures added - in the fixture creator
* Selection order in Fanning added
* Added midi and keyboard function: "Disable tap/manual trigger"
* New sound to light module !!! (Thanks to Remco, check out his website for updates http://www.digiplay.nl/fs/)
* Search function in fixture list
* Disable/enable tap sync/manual trigger per sequence
* Disable/enable all fades in a sequence
* Added support for Enttec wings
* Added "Flip" function for movingheads (pan/tilt ranges can be configured with the Fixturecreator)
* Output refreshrate can be changed
* Low and high limit can be set: rightclick on a slider at the right, in the final release I added the same options in the output view and added a "Remove limits" function.
* Added two plugins: Suntrix and Ledtrix
* Several enhancements
Improvements:
* Some speed improvements in the override buttons
* Change made in the behaviour of the Tap sync: first and second tap will trigger the sequences.
* Added print function to print a list of you fixtures
* Output view will show channels with settings on a red background, at the bottom you can read the actif settings for that channel.
* Extra control added to the touch interface n°_2: Encoder wheel. (automatically selected depending on function)
* Security added to touch interface n°_2
* Some small enhancements in the Enttec wing code
* Changed Fixturecreator open dialog
* Tweaked FadeTimer
* FX engine: shutter chase compatible with led fixtures (intensity channel must be configured)
* FX engine: color chase compatible with led fixtures.
* MIDI notes editable without connected controller
* Added dialog when exiting sequence creator "save first?"
* FX are applied to fixtures in selection order
* MIDI "control change" message fix (BCF2000,...)
* FX window made smaller
* Realtime mode (scheduler) starts when freestyler starts (if configured)
* New commandline added (compatible with Enttec program wing)
* Create sequence: initial values change
* Fades are automatically disabled at high speeds
* Refresh fixture list button
* Added some extra keyboard and midi functions
* Changed the way sequences can be made during a show, 3D viewer shows the created sequence.
* Process has now high priority
* Extra FX were added
* Velleman interface output tweaked
* Touchscreens are from now on always on top
Bugs fixes:
* Bug fixed in override buttons: shapes got disabled when a second button was enabled
* Bug fixed in cue: Shapes didn't work LTP
* Bug fixed in override buttons: transparancy worked in the wrong order
* Some more small bug fixes and improvements in the cue
* Bug fixed in create sequence window: preset fade channels were not played
* Bug fixed in preset editing
* Bug fixed in pan/tilt keyboard shortcuts
* Bug fixed (if a fixture name was altered and ENTER was pressed FS became corrupt)
* Bug fixed in DMX400 if master intensity was less than background intensity.
* Bug fixed in master intensity when intensity and shutter channel are shared
* Bug fixed in cue (tilt channel of the latest fixture not working in some cases)
* Some bugs fixed when creating a sequence
* Intensity label bug fixed
* Bug fixed: FS crashes if the interface wasn't connected
* Ignore master intensity bug fixed
* Default installation folder has been changed to c:\freestyler (issues with Vista and Windows7)
* Bug fixed in macro window
* Issue with Submasters and manual trigger / tap sync fixed
* Some bugs in the FX window
* Bug fixed in cue (tap state not saved correctly)
* Create directory issue fixed
* Preset values not changed when edited or applied fixed
* Some fixes for netbook use
* Bugs fixed in Enttec Wing system
* Compact view bug fixed
* Fixed 100% cpu at first run
* Bug fixed in shape system
* Bug fixed in cuelist and overridebuttons (captions on buttons not changing)
* Bug fixed in "Loop all sequences"
* Bug fixed in MIDI override buttons: Flash buttons sometimes got stuck
* Bug fixed in touchscreen (cuelist and override tabs)
* Bug fixed in external control system: if a fader was touched without a fixture been selected FS crashes.
* Option added to increase process priority (previously on some systems FS didn't start the first time)