Support Forum

Spirit wrote: 14 Sep 2013, 10:55 hi you can also try this fixture file they seem the same but i added a little bit more Macro's

/spirit

After download and install i get the error code
Please fill in all gobo values

Try this one.

It is the same file just saved / exported with the latest version of Fixture Creator.
/Jan

Jan_K wrote: 03 Aug 2017, 06:05 Try this one.

It is the same file just saved / exported with the latest version of Fixture Creator.

unknown_magic_ball_06ch.pff

/Jan

the Colors are not good working
And rotating is not working !

Is it exactly the same fixture you have and does it have the same DMX table.

Eventually upload the dmx table here so we can check.

/Jan

The thabel

The colors looks okay but the motor control don't match the DMX table 100% so you need to create your own.

If you look at channel 5 then in the table then there are 3 functionality ranges and in the fixture file only two are defined.

/Jan

Jan_K wrote: 07 Aug 2017, 06:12 The colors looks okay but the motor control don't match the DMX table 100% so you need to create your own.

If you look at channel 5 then in the table then there are 3 functionality ranges and in the fixture file only two are defined.

/Jan

how can I do that ?

Well you open the fixture with "Fixture Creator" and alternate the functionality for channel 5.
It is made as a gobo1 control.
(Save the fixture with a new name so you have the old as backup)


You had and issue with color "not good working" please explain?


/Jan