These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE
if all else fails and you need a fixture consider the fixture building service HERE

Prob with entec open and Laser JB System Spacecolor

Discuss everything regarding DMX interfaces in this forum.
Post Reply
Jaykie
Can now teach FS to others (Hopefully!)
Posts: 91
Joined: July 10th, 2007, 4:31 pm
FreeStyler Version: 3.01
Twitter: http://twitter.com/jaykie

Prob with entec open and Laser JB System Spacecolor

Post by Jaykie »

This is from the old forum
Wisley
I have an Entec Open Dmx Interface and try to control the Space Color Laser from JBSystem. The Problem is that the mirrows work very slow when i use Dmx. After set in an program and cut the connection it works very good. The patterns also look like shi.. with the Dmx. I heard something about that the interface is to slow for this.Does anybody have this Laser and some experience with this?
Thanks for answere
Markus, Germany

stevet
Have you tried the JBSystem with a different controller?

Wisley
No I havn´t tried. I would like to know some experience from other user, befor i´ll buy a new controller...

David
Hi Markus,
Yes it is an interface problem. I have the same problem, although with a different laser and was told by the company that the Enttec open DMX is too slow.


Top
Post Reply

Return to “DMX Interfaces”