Hello,
im looking for this fixture file. Beamz LCB144 LED Colour Bar.
is here someone that have this fixture and want to share this ?
King regards
Beamz LCB144 LED Colour Bar
Forum rules
Only Create posts with the Title being the fixture your supplying and add the fixture as an attachment! NO Off site links if this is a problem talk to an ADMIN.
Only Create posts with the Title being the fixture your supplying and add the fixture as an attachment! NO Off site links if this is a problem talk to an ADMIN.
-
- Knows how to turn Lights ON
- Posts: 4
- Joined: December 24th, 2014, 9:54 am
- FreeStyler Version: 3.5.5
- I Use FreeStyler for: Just for the Fun of it.
-
- Moderator
- Posts: 768
- Joined: November 16th, 2016, 2:24 pm
- FreeStyler Version: 4.1.6
- I Use FreeStyler for: Stage Show
Re: Beamz LCB144 LED Colour Bar
Attached is my attempt at a fixture definition for your instrument.
The fixture is defined for the 6 channel mode of operation for your instrument.
If I understand the user manual correctly it should also work for the 12 channel mode and the 48 channel mode. To use this fixture definition to control your instrument in 12 channel mode simply add 2 fixtures to the Freestyler work space; for the 48 channel mode add 8 fixtures to the Freestyler work space.
Your feedback is welcome.
The fixture is defined for the 6 channel mode of operation for your instrument.
If I understand the user manual correctly it should also work for the 12 channel mode and the 48 channel mode. To use this fixture definition to control your instrument in 12 channel mode simply add 2 fixtures to the Freestyler work space; for the 48 channel mode add 8 fixtures to the Freestyler work space.
Your feedback is welcome.
You do not have the required permissions to view the files attached to this post.
-
- Knows how to turn Lights ON
- Posts: 4
- Joined: December 24th, 2014, 9:54 am
- FreeStyler Version: 3.5.5
- I Use FreeStyler for: Just for the Fun of it.
Re: Beamz LCB144 LED Colour Bar
Hello,
Thanks for the help. i will test it soon.
Every 6 channels is 1 segment. the fixture has 8 segments so..6x8=48 channels.
I think you need to made 1 fixture with 48 channels when you want the 8 segments.
Thanks for the help. i will test it soon.
Every 6 channels is 1 segment. the fixture has 8 segments so..6x8=48 channels.
I think you need to made 1 fixture with 48 channels when you want the 8 segments.
-
- Moderator
- Posts: 768
- Joined: November 16th, 2016, 2:24 pm
- FreeStyler Version: 4.1.6
- I Use FreeStyler for: Stage Show
Re: Beamz LCB144 LED Colour Bar
Yes, every 6 channels is 1 segment. And, as you said, 8 segments times 6 channels = 48 channels.
1 fixture could be defined with 48 channels. The problem with that approach is the 8 dimmer channels. Freestyler will only recognize 1 channel as a dimmer. The other 7 certainly can be controlled via the standard sliders, they will not respond to the Master Dimmer, Black Out, or the programming window. By using the 6 channel fixture and adding 8 of them to the Freestyler workspace (making sure they have the correct addresses) then Freestyler is aware of all 8 dimmer channels.
1 fixture could be defined with 48 channels. The problem with that approach is the 8 dimmer channels. Freestyler will only recognize 1 channel as a dimmer. The other 7 certainly can be controlled via the standard sliders, they will not respond to the Master Dimmer, Black Out, or the programming window. By using the 6 channel fixture and adding 8 of them to the Freestyler workspace (making sure they have the correct addresses) then Freestyler is aware of all 8 dimmer channels.
-
- Knows how to turn Lights ON
- Posts: 4
- Joined: December 24th, 2014, 9:54 am
- FreeStyler Version: 3.5.5
- I Use FreeStyler for: Just for the Fun of it.
Re: Beamz LCB144 LED Colour Bar
Hello Rod,
Finaly some time to test it..but it doesnt work at all..i use youre fixture..
-Enttec open DMX usb 1 universe
-freestyler x2 3.6.51
it has dmx and if i remove the fixture then i see some leds burning red or blue whatever.
Finaly some time to test it..but it doesnt work at all..i use youre fixture..
-Enttec open DMX usb 1 universe
-freestyler x2 3.6.51
it has dmx and if i remove the fixture then i see some leds burning red or blue whatever.
-
- Moderator
- Posts: 768
- Joined: November 16th, 2016, 2:24 pm
- FreeStyler Version: 4.1.6
- I Use FreeStyler for: Stage Show
Re: Beamz LCB144 LED Colour Bar
Please check the configuration of your physical instrument:
(1) it is set to DMX
(2) it is set to either 6, 12 or 48 channel mode
(3) that the starting address of your physical instrument is the same as the starting address of the Freestyler fixture
(1) it is set to DMX
(2) it is set to either 6, 12 or 48 channel mode
(3) that the starting address of your physical instrument is the same as the starting address of the Freestyler fixture
-
- Knows how to turn Lights ON
- Posts: 4
- Joined: December 24th, 2014, 9:54 am
- FreeStyler Version: 3.5.5
- I Use FreeStyler for: Just for the Fun of it.
Re: Beamz LCB144 LED Colour Bar
hello,
1, yes
2, 6 channels
3, yes
1, yes
2, 6 channels
3, yes
-
- Moderator
- Posts: 768
- Joined: November 16th, 2016, 2:24 pm
- FreeStyler Version: 4.1.6
- I Use FreeStyler for: Stage Show
Re: Beamz LCB144 LED Colour Bar
Please use Freestyler's backup to create a backup of your location. Post the backup to this conversation.
Also, I'm not sure I understand your comment, " if i remove the fixture then i see some leds burning red or blue whatever." Please explain in more detail. Thank you.
Also, I'm not sure I understand your comment, " if i remove the fixture then i see some leds burning red or blue whatever." Please explain in more detail. Thank you.
-
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: January 4th, 2011, 9:57 pm
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: Beamz LCB144 LED Colour Bar
When you remove the DMX signal then the fixture goes into sound or auto mode and give you some random light.
To me it looks like the DMX is working. DMX signal present default data send probably 0 on all 6 channels.
My suggestion will be to connect only this fixture and set it to address 1, both in Freestyler and the fixture.
Then open the output monitor so you can see what you are sending / changing and then use the sliders in right side of FreeStyler to just test the what happens.
/Jan
To me it looks like the DMX is working. DMX signal present default data send probably 0 on all 6 channels.
My suggestion will be to connect only this fixture and set it to address 1, both in Freestyler and the fixture.
Then open the output monitor so you can see what you are sending / changing and then use the sliders in right side of FreeStyler to just test the what happens.
/Jan