Freestyler not communicating with Magic 3d Easy View
Forum rules
Sunlight is the creater of Magic 3D Easy View we can try (the forum users) and help with any problems you have with the version provided with FreeStyler but remember this is a 3rd party program and not made by the FreeStyler Developer.
Sunlight is the creater of Magic 3D Easy View we can try (the forum users) and help with any problems you have with the version provided with FreeStyler but remember this is a 3rd party program and not made by the FreeStyler Developer.
-
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: January 4th, 2011, 9:57 pm
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: Freestyler not communicating with Magic 3d Easy View
Hej buttza.
Can you please place this info in the freestyler wiki.
I think this is relevant info for the "Troubleshooting" or "3D" part.
/Jan
Can you please place this info in the freestyler wiki.
I think this is relevant info for the "Troubleshooting" or "3D" part.
/Jan
- buttza
- FS is my life
- Posts: 351
- Joined: January 7th, 2010, 2:14 pm
- FreeStyler Version: 3.6.4
- I Use FreeStyler for: Stage Show
- Twitter: twitter.com/@buttza
Re: Freestyler not communicating with Magic 3d Easy View
Will do Jan.
I will also add the loopback info etc too.
I will also add the loopback info etc too.
-
- Just started using FS
- Posts: 10
- Joined: July 14th, 2015, 7:00 pm
- FreeStyler Version: 3.0
- I Use FreeStyler for: DJ
Re: Freestyler not communicating with Magic 3d Easy View
Hi
I am trying get easyview working aswell.
I am on Win 7. The DMX Lamp is green and it says controlled by freestyler.
But there is no change on the DMX channels when i change something in Freestyler.
The Lamps do not react, even though they are on the same channels.
I tried it with the virtual interface aswell as with the method butzza has shown for xp.
Does someone know that problem? Does Easyview only react on cues? does easyview need to go in a specific mode to show Freestyler actions?
Thanks
edit.: now the DMX Level is shown, but the lamp does not shine. Fixture is a cameo Studio Par 64
I am trying get easyview working aswell.
I am on Win 7. The DMX Lamp is green and it says controlled by freestyler.
But there is no change on the DMX channels when i change something in Freestyler.
The Lamps do not react, even though they are on the same channels.
I tried it with the virtual interface aswell as with the method butzza has shown for xp.
Does someone know that problem? Does Easyview only react on cues? does easyview need to go in a specific mode to show Freestyler actions?
Thanks
edit.: now the DMX Level is shown, but the lamp does not shine. Fixture is a cameo Studio Par 64
-
- Moderator
- Posts: 948
- Joined: September 18th, 2012, 9:32 pm
- FreeStyler Version: None
- I Use FreeStyler for: To help others here on the Forum!
Re: Freestyler not communicating with Magic 3d Easy View
Make sure you're not running an old version of 3D view!gammagoblin wrote:Hi
I am trying get easyview working aswell.
I am on Win 7. The DMX Lamp is green and it says controlled by freestyler.
But there is no change on the DMX channels when i change something in Freestyler.
The Lamps do not react, even though they are on the same channels.
I tried it with the virtual interface aswell as with the method butzza has shown for xp.
Does someone know that problem? Does Easyview only react on cues? does easyview need to go in a specific mode to show Freestyler actions?
Thanks
edit.: now the DMX Level is shown, but the lamp does not shine. Fixture is a cameo Studio Par 64
-
- Just started using FS
- Posts: 10
- Joined: July 14th, 2015, 7:00 pm
- FreeStyler Version: 3.0
- I Use FreeStyler for: DJ
Re: Freestyler not communicating with Magic 3d Easy View
Freestyler is 3.6.2
Easy view is 12.12.2014. Its as new as possible (nicolaudie download site)
Easy view is 12.12.2014. Its as new as possible (nicolaudie download site)
-
- FS is my life
- Posts: 253
- Joined: April 9th, 2012, 10:27 pm
- FreeStyler Version: 3.5.7
- I Use FreeStyler for: DJ
- Contact:
Re: Freestyler not communicating with Magic 3d Easy View
If the dmx level is showing, then the communication should be there?
Did you remember to put the master intensity up by selecting the fixture, opening the lamp window, and increasing sliding the master up in freestyler? (I'm not joking or being silly - I used to forget this all the time when I was learning the ropes). Otherwise sending 100% of any colour is useless if the main intensity/dimmer for that fixture is zero.
Did you remember to put the master intensity up by selecting the fixture, opening the lamp window, and increasing sliding the master up in freestyler? (I'm not joking or being silly - I used to forget this all the time when I was learning the ropes). Otherwise sending 100% of any colour is useless if the main intensity/dimmer for that fixture is zero.
-
- Just started using FS
- Posts: 10
- Joined: July 14th, 2015, 7:00 pm
- FreeStyler Version: 3.0
- I Use FreeStyler for: DJ
Re: Freestyler not communicating with Magic 3d Easy View
It certainly has something to do with the dimmer, because, the Par 56 (who dont have one) do react but the par 64 (who have one) don't. I Checked the lamp-dimmer, the master-dimmer. Everything shoul work. When i hit a cue one of the 4 Par64 is reacting even though it wasnt part of the sequence.
If i connect the lamps to th eInterface, they shine as they should.
If i connect the lamps to th eInterface, they shine as they should.
-
- FS is my life
- Posts: 253
- Joined: April 9th, 2012, 10:27 pm
- FreeStyler Version: 3.5.7
- I Use FreeStyler for: DJ
- Contact:
Re: Freestyler not communicating with Magic 3d Easy View
Then that points to a bad fixture within the 3d easyview program. It does have its own editor (nothing to do with freestyler one) where you can check the channel allocation and values are correct.
Unfortunately it is laid out a little differently and adds more things to figure out/learn into the mix, but you will probably find your answer in there.
Unfortunately it is laid out a little differently and adds more things to figure out/learn into the mix, but you will probably find your answer in there.
-
- Just started using FS
- Posts: 10
- Joined: July 14th, 2015, 7:00 pm
- FreeStyler Version: 3.0
- I Use FreeStyler for: DJ
Re: Freestyler not communicating with Magic 3d Easy View
I checked the fixture in the scan lib. Didn't find the fault.
Thats the Freestyler fixture:
http://workupload.com/file/tXaw6Wg6
Thats the Easy view Fixture:
http://workupload.com/file/89ZNnQCq
Thats the Freestyler fixture:
http://workupload.com/file/tXaw6Wg6
Thats the Easy view Fixture:
http://workupload.com/file/89ZNnQCq
-
- Just started using FS
- Posts: 10
- Joined: July 14th, 2015, 7:00 pm
- FreeStyler Version: 3.0
- I Use FreeStyler for: DJ
Re: Freestyler not communicating with Magic 3d Easy View
Does really nobody know why the Easyview fixture is not reacting to the FS comands?
- buttza
- FS is my life
- Posts: 351
- Joined: January 7th, 2010, 2:14 pm
- FreeStyler Version: 3.6.4
- I Use FreeStyler for: Stage Show
- Twitter: twitter.com/@buttza
Re: Freestyler not communicating with Magic 3d Easy View
Add a generic par can you your list of fixtures in both freestyler and 3D viewer on the same universe and Channel
Then dim up and down to test it is actually working.
Also check your firewall settings.
Then dim up and down to test it is actually working.
Also check your firewall settings.
- djSupport
- Hosts the Freestyler Forum and is an Admin!
- Posts: 1902
- Joined: July 9th, 2007, 6:57 pm
- FreeStyler Version: Forum la
- I Use FreeStyler for: Just for the Fun of it.
- Contact:
Re: Freestyler not communicating with Magic 3d Easy View
I'm having a similar problem to gammagoblin on a remote assistance on someone elses machine... fucking easy3d my arse!
Heather Trott, You Babe! I Drive a Dacia Duster and Explore! Check it out
- buttza
- FS is my life
- Posts: 351
- Joined: January 7th, 2010, 2:14 pm
- FreeStyler Version: 3.6.4
- I Use FreeStyler for: Stage Show
- Twitter: twitter.com/@buttza
Re: Freestyler not communicating with Magic 3d Easy View
Hey DJ, did you ever get this sorted?
-
- Knows how to turn Lights ON
- Posts: 1
- Joined: November 15th, 2016, 5:19 am
Re: Freestyler not communicating with Magic 3d Easy View
Where is the download link for 3D? The one I currently have doesnt connect to FS, its not in the toolbar and olny does SSL, SSL2
-
- Starting to get to grips with FreeStyler
- Posts: 15
- Joined: January 19th, 2011, 11:28 pm
- FreeStyler Version: 4.1.1
- I Use FreeStyler for: DJ
Re: Freestyler not communicating with Magic 3d Easy View
Hi everybody,
I have installed both Freesyler (3.6.35) and Magic 3d Easy View on my PC (windows 10 anniversary).
I can open the 2 programs, but, to make 3d easy view communicate with Freestyler, we have to open it directly in Freestyler with the "3D" button on the taskbar.
But in my case (and I don't know why) inside Freestyler, the 3D button is only a grey button that I can't activate!! (I already have selected "Virtual interface").
Can someone help me and tell me what I'm doing wrong?
Thanks for your help.
I have installed both Freesyler (3.6.35) and Magic 3d Easy View on my PC (windows 10 anniversary).
I can open the 2 programs, but, to make 3d easy view communicate with Freestyler, we have to open it directly in Freestyler with the "3D" button on the taskbar.
But in my case (and I don't know why) inside Freestyler, the 3D button is only a grey button that I can't activate!! (I already have selected "Virtual interface").
Can someone help me and tell me what I'm doing wrong?
Thanks for your help.
- Uriahdemon
- FS is my life
- Posts: 266
- Joined: August 18th, 2012, 10:15 am
- FreeStyler Version: 3.5.5
- I Use FreeStyler for: Band
- Contact:
Re: Freestyler not communicating with Magic 3d Easy View
Hi,
I have been using V3.5.4 for quite some time but decided to try the latest FS software. Unfortunately I cannot get FS to talk to EV3D. I have gone back to this thread and others including Nathanrs thread but unfortunately I cannot get them to talk to each other. In my previous version V3.5.4 I had similiar issues I seem to remember however these were overcome using Nathanrs advice.
Right now EV3D red light is on and the Universe choice table shows but the only thing I can change is the tick in the box for Automatic, the rest is greyed out.
I have been using V3.5.4 for quite some time but decided to try the latest FS software. Unfortunately I cannot get FS to talk to EV3D. I have gone back to this thread and others including Nathanrs thread but unfortunately I cannot get them to talk to each other. In my previous version V3.5.4 I had similiar issues I seem to remember however these were overcome using Nathanrs advice.
Right now EV3D red light is on and the Universe choice table shows but the only thing I can change is the tick in the box for Automatic, the rest is greyed out.
Mac
www.mclite.co.uk
www.mclite.co.uk
- djSupport
- Hosts the Freestyler Forum and is an Admin!
- Posts: 1902
- Joined: July 9th, 2007, 6:57 pm
- FreeStyler Version: Forum la
- I Use FreeStyler for: Just for the Fun of it.
- Contact:
Re: Freestyler not communicating with Magic 3d Easy View
ensure you report it as a BUG on the tracker if not done already, Easy3d is not our software so we have 'borrowed time' on it!
Heather Trott, You Babe! I Drive a Dacia Duster and Explore! Check it out
-
- Knows how to turn Lights ON
- Posts: 1
- Joined: December 28th, 2018, 12:25 am
- FreeStyler Version: 3.4.6
- Twitter: no
- buttza
- FS is my life
- Posts: 351
- Joined: January 7th, 2010, 2:14 pm
- FreeStyler Version: 3.6.4
- I Use FreeStyler for: Stage Show
- Twitter: twitter.com/@buttza