I have a LIVE show to do for a few bands on Saturday and I had a few questions before I buy this midi controller.
Will I be able to assisgn the faders to Pan/Tilt and assign them to play sequences?
I want to know if this is sutible for a live event.
Also, I was wondering if freestyler had a command line system like the ETC console I'm working off of.
Channel 52 + 55 @ FULL in some type of command?
Those are my questions, thank you .
worth the buy?
-
- Starting to get to grips with FreeStyler
- Posts: 22
- Joined: May 5th, 2010, 5:10 pm
- I Use FreeStyler for: Stage Show
- Spirit
- Pro Supporter! (Moderator)
- Posts: 1421
- Joined: July 10th, 2010, 8:55 pm
- FreeStyler Version: 3.5.9
- I Use FreeStyler for: Nightclub Lighting
Re: worth the buy?
Hej mattjake4
Yes you can use Midi faders to Start/stop Sequences ( Submaster intentensitie And Start/Stop control )
Yes you can also assinge the Pan/tilt to a Fader. BUT this only works with The Current Selected Fixture.
And YES! freestyler also have a Command Line System. You can find it on the Toolbar as "GO"
and on this this page you can see all the Command you can use.
http://www.freestylersupport.com/wiki/p ... un_command
and here you can find all the External commands you can use.
http://www.freestylersupport.com/wiki/e ... l_commands
and i use the BCF2000 and it works realy nice.
/spirit
Yes you can use Midi faders to Start/stop Sequences ( Submaster intentensitie And Start/Stop control )
Yes you can also assinge the Pan/tilt to a Fader. BUT this only works with The Current Selected Fixture.
And YES! freestyler also have a Command Line System. You can find it on the Toolbar as "GO"
and on this this page you can see all the Command you can use.
http://www.freestylersupport.com/wiki/p ... un_command
and here you can find all the External commands you can use.
http://www.freestylersupport.com/wiki/e ... l_commands
and i use the BCF2000 and it works realy nice.
/spirit
AMD FX-6100 (3.6ghz)x6, Nvidia 770GTX 4GB, 8GB Ram,ROG MB, enttec Pro, Open enttec, Velleman, T2250MTS-B1 22"touchscreen, Ilyama 23" screen, scans, dimm, rgbled, laser, soundsystem Just a drive-in show. Live and Dance
- fred
- Starting to get to grips with FreeStyler
- Posts: 28
- Joined: April 21st, 2011, 8:39 pm
- FreeStyler Version: 3.9
- I Use FreeStyler for: DJ
Re: worth the buy?
Hi Spirit,
Apparently you have a big how-know about BCF2000
I just bought it 2 days ago and I would like to know what you recommand to use it, please ?
Till now I used external keyboards with sequences which I prepared before the show.
But I really need sometimes to interrupt the sequence and play with heads of lyres for example
Thanks a lot
Best regards,
Apparently you have a big how-know about BCF2000
I just bought it 2 days ago and I would like to know what you recommand to use it, please ?
Till now I used external keyboards with sequences which I prepared before the show.
But I really need sometimes to interrupt the sequence and play with heads of lyres for example
Thanks a lot
Best regards,
-
- Knows how to turn Lights ON
- Posts: 7
- Joined: August 20th, 2015, 6:26 pm
- I Use FreeStyler for: Home Lighting Control
Re: worth the buy?
Spirit wrote: And YES! freestyler also have a Command Line System. You can find it on the Toolbar
and on this this page you can see all the Command you can use.
http://www.freestylersupport.com/wiki/p ... un_command
and here you can find all the External commands you can use.
http://www.freestylersupport.com/wiki/e ... l_commands
Hi,
Thanks for posting the link to the list of commands.
I'm trying to use OpenRemote to control FreeStyler, which in turn is driving some DMx to SPI LEDs.
I can't seem to find out how to phrase a TCP command correctly.
I have a TCP accessible relay board which responds really well.
All I want to do is start and stop sequences.
If I get really adventurous, I might try to change the speed by sending a TCP command.
Any assistance would be welcomed.