If I want my BCF2000 faders to control group intensity how would I go about this with the midi setup? I can use midi to DMX to control a single fixtures dimmer but not the whole group. I want this to work by default without selecting anything. I know how to select a group and have a slider for intensity but that is not what I want. This is what I want:
BCF Fader 1 = Group 1 intensity
BCF Fader 2 = Group 2 Intensity
BCF Fader 3 = Group 3 Intensity
...
....
....
I want this to work this way when Freestyler opens without having to select anything.
I am pretty sure it can be done via "Commands" but I have no idea how to make them and the Freestyler Wiki did not help me at all What is the formula for making "commands"?
Rusty
Midi Control?
-
- FS is my life
- Posts: 773
- Joined: July 11th, 2007, 8:39 pm
- FreeStyler Version: 4.01
- I Use FreeStyler for: Nightclub Lighting
- Twitter: twitter.com/
- Contact:
- Spirit
- Pro Supporter! (Moderator)
- Posts: 1421
- Joined: July 10th, 2010, 8:55 pm
- FreeStyler Version: 3.5.9
- I Use FreeStyler for: Nightclub Lighting
Re: Midi Control?
hi
the only way to do this is to use the submasters.
and you can enable "open submaster with startup" on the freestyler setup.
the only way to do this is to use the submasters.
and you can enable "open submaster with startup" on the freestyler setup.
AMD FX-6100 (3.6ghz)x6, Nvidia 770GTX 4GB, 8GB Ram,ROG MB, enttec Pro, Open enttec, Velleman, T2250MTS-B1 22"touchscreen, Ilyama 23" screen, scans, dimm, rgbled, laser, soundsystem Just a drive-in show. Live and Dance