These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE
if all else fails and you need a fixture consider the fixture building service HERE

Which interface for stm32f107？

Discuss everything regarding DMX interfaces in this forum.
Post Reply
setp5th
Knows how to turn Lights ON
Posts: 2
Joined: December 8th, 2013, 2:50 am
FreeStyler Version: 3.50
I Use FreeStyler for: Stage Show

Which interface for stm32f107？

Post by setp5th »

I am recently playing with my stm32f107 dev-board and gona use it to convert usb signal to dmx512.
Freestyler seems very powerful, but what interface should I select for my MCU?
Any progame guide, or APIs, Protocol?
I've also got an S3c2440 board, and any interface for it?
thank you. :D
Maurice


Top
User avatar
Spirit
Pro Supporter! (Moderator)
Posts: 1421
Joined: July 10th, 2010, 8:55 pm
FreeStyler Version: 3.5.9
I Use FreeStyler for: Nightclub Lighting

Re: Which interface for stm32f107？

Post by Spirit »

hi i have the Arduino UNO and i know i can use the ENTTEC OPEN driver to make a communication between Software and dev board. because the Enttec open driver is open course, i think.

you also need a to connect a SN75176BP IC to the RX, TX and a ENABLE line to a digital I/O
you can also use other RS485 IC's...

thats all i know for now as i'm on the begin of electronics..


/spirit
AMD FX-6100 (3.6ghz)x6, Nvidia 770GTX 4GB, 8GB Ram,ROG MB, enttec Pro, Open enttec, Velleman, T2250MTS-B1 22"touchscreen, Ilyama 23" screen, scans, dimm, rgbled, laser, soundsystem Just a drive-in show. Live and Dance
Top
setp5th
Knows how to turn Lights ON
Posts: 2
Joined: December 8th, 2013, 2:50 am
FreeStyler Version: 3.50
I Use FreeStyler for: Stage Show

Re: Which interface for stm32f107？

Post by setp5th »

Spirit wrote:hi i have the Arduino UNO and i know i can use the ENTTEC OPEN driver to make a communication between Software and dev board. because the Enttec open driver is open course, i think.

you also need a to connect a SN75176BP IC to the RX, TX and a ENABLE line to a digital I/O
you can also use other RS485 IC's...

thats all i know for now as i'm on the begin of electronics..


/spirit
Thank you.
but I want to use the usb device contained in stm32 IC, seems no way to make use of Enttec open drivers....
or I have to fulfill Enttec API's functions using my MCU??

Maurice
Top
Post Reply

Return to “DMX Interfaces”