I am recently playing with my stm32f107 dev-board and gona use it to convert usb signal to dmx512.
Freestyler seems very powerful, but what interface should I select for my MCU?
Any progame guide, or APIs, Protocol?
I've also got an S3c2440 board, and any interface for it?
thank you.
Maurice
Which interface for stm32f107?
-
- Knows how to turn Lights ON
- Posts: 2
- Joined: December 8th, 2013, 2:50 am
- FreeStyler Version: 3.50
- I Use FreeStyler for: Stage Show
- Spirit
- Pro Supporter! (Moderator)
- Posts: 1421
- Joined: July 10th, 2010, 8:55 pm
- FreeStyler Version: 3.5.9
- I Use FreeStyler for: Nightclub Lighting
Re: Which interface for stm32f107?
hi i have the Arduino UNO and i know i can use the ENTTEC OPEN driver to make a communication between Software and dev board. because the Enttec open driver is open course, i think.
you also need a to connect a SN75176BP IC to the RX, TX and a ENABLE line to a digital I/O
you can also use other RS485 IC's...
thats all i know for now as i'm on the begin of electronics..
/spirit
you also need a to connect a SN75176BP IC to the RX, TX and a ENABLE line to a digital I/O
you can also use other RS485 IC's...
thats all i know for now as i'm on the begin of electronics..
/spirit
AMD FX-6100 (3.6ghz)x6, Nvidia 770GTX 4GB, 8GB Ram,ROG MB, enttec Pro, Open enttec, Velleman, T2250MTS-B1 22"touchscreen, Ilyama 23" screen, scans, dimm, rgbled, laser, soundsystem Just a drive-in show. Live and Dance
-
- Knows how to turn Lights ON
- Posts: 2
- Joined: December 8th, 2013, 2:50 am
- FreeStyler Version: 3.50
- I Use FreeStyler for: Stage Show
Re: Which interface for stm32f107?
Thank you.Spirit wrote:hi i have the Arduino UNO and i know i can use the ENTTEC OPEN driver to make a communication between Software and dev board. because the Enttec open driver is open course, i think.
you also need a to connect a SN75176BP IC to the RX, TX and a ENABLE line to a digital I/O
you can also use other RS485 IC's...
thats all i know for now as i'm on the begin of electronics..
/spirit
but I want to use the usb device contained in stm32 IC, seems no way to make use of Enttec open drivers....
or I have to fulfill Enttec API's functions using my MCU??
Maurice