Please see attached my fixture for the Kam LED Powerbar tested with a Enttec Pro DMX.
The fixture is 15 channels, however I've split the fixture into 2.
Kam Powerbar LED Master should be setup to control the first three channels
Channel 1 – Internal Programs, Auto Mode and Sound Controlled Mode
Channel 2 – Master Dimmer
Channel 3 – Master Strobe
Kam Powerbar LED Can This fixture has 4 cans and there are 3 channels each so you will need to add this fixture in 4 times once for each can, The reason I decided to septate the fixture up is so its easier to vision what is happening with each LED can.
Can 1
Channel 4 - Red
Channel 5 - Green
Channel 6 - Blue
Can 2
Channel 7 - Red
Channel 8 - Green
Channel 9 - Blue
Can 3
Channel 10 - Red
Channel 11 - Green
Channel 12 - Blue
Can 4
Channel 13 - Red
Channel 14 - Green
Channel 15 - Blue
Kam - LED Powerbar
- biggus
- Starting to get to grips with FreeStyler
- Posts: 29
- Joined: October 4th, 2011, 2:07 pm
- I Use FreeStyler for: Nightclub Lighting
- Twitter: http://www.twitter.com/emrdisco
Kam - LED Powerbar
You do not have the required permissions to view the files attached to this post.
- biggus
- Starting to get to grips with FreeStyler
- Posts: 29
- Joined: October 4th, 2011, 2:07 pm
- I Use FreeStyler for: Nightclub Lighting
- Twitter: http://www.twitter.com/emrdisco
Re: Kam - LED Powerbar
Fixture file attached
You do not have the required permissions to view the files attached to this post.