First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE
if all else fails and you need a fixture consider the fixture building service HERE

TSL-100 Problems - fixed

Fixture File Help & Support, This is not a Request forum we are here to help you not work for you... If you do need a fixture and don't wish to make one yourself or learn then go here : http://www.freestylersupport.com/wiki/f ... on_service
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service

You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
Post Reply
Thomaxs
Knows how to turn Lights ON
Posts: 2
Joined: 27 Jun 2012, 17:53
I Use FreeStyler for: Just for the Fun of it.

TSL-100 Problems - fixed

Post by Thomaxs »

Hi There,

i hope i´am in the right Forum.

for the first, this are my first steps in DMX and Freestyler and i searched the Forum and the google search with no result for my problem.

Setup:

Win7 64 bit
Stageline DMX-510 USB
TSL-100 LED scanner

So, my problem is, with the Stageline software i can control the Scanner without problems, Pan, tilt etc.
But the Software form Stageline is not really good and i want use freestyler, it looks very nice :)

ah, my problem:

If i control the scanner with Freestyler, for example pan/tilt, the scanner move to the position i´ve selected in freestyler. But in steps of 1-3 seconds, the scanner (i think) move shortly to zero position and back to the selected posiotion. he dosent reach the zero, so it is only a twitch.

anybody any ideas?

first i think the DMX-USB modul is the problem, but with stageline software these problems are not present.

thank you and good luck to understand my english ;)

greets

Thomas


Top
Thomaxs
Knows how to turn Lights ON
Posts: 2
Joined: 27 Jun 2012, 17:53
I Use FreeStyler for: Just for the Fun of it.

Re: TSL-100 Problems - fixed

Post by Thomaxs »

Hi all,

ok, shame on me :roll:

one thing i´ve forgot to try is to change the USB port from my pc.

The external USB Ports from the Tower was the problem. Now the DMX controller is directly connected to the Motherboard USB Port aaaaannnnnd?

it´s running :D

greez Thomas
Top
Post Reply

Return to “FreeStyler Fixture Files - Help & Support”