CH1 - 0-255 = X Scanning
CH2 - 0-255 = Y Scanning
CH3 -
- 0-1 = Close
- 2-100 = Strobe slow-fast
- 101-199 = Random Strobe slow-fast
- 208-217 = Reset (after 3sec.)
- 218-255 = Open
CH5 -
- 0-2 = RED
- 3-4 = Red & White
- 5-7 = Red & Green
- 8-9 = Red & Green & White
- 10-12 - Green
- 13-14 - Green & White
- 15-17 - Green & Blue
- 18-19 - Green & Blue & White
- 20-22 - Blue
- 23-24 - Blue & White
- 25-27 - Red & Blue
- 28-29 - Red & Blue & White
- 30-39 - White
- 40-49 - Red & Green & Blue & White
- 50-83 - R Open, G Gradual, B Close
- 84-117 - R Gradual, G Open, B Close
- 118-151 - G Open, R Close, B Gradual
- 152-185 - R Close, G Gradual, B Open
- 186-218 - B Open, R Gradual, G Close
- 219-252 - R Open, B Gradual, G Close
- 253-255 - RGBW Dimmer
CH7 - 0-255 = G, Dimmer Dark to Light
CH8 - 0-255 = B, Dimmer Dark to Light
CH9 - 0-255 W, Dimmer Dark to Light
CH10 -
- 0-5 = RGBW, Color is decide by CH5
- 6-127 = RGBW Graduated, Speed adjustment from slow to fast
- 128-255 = R,RG,G,GB,B,RB,RGB,RGBW RAINBOW Effect, Speed adjustment from slow to fast
CH12 - 0-255 = Y Fine
CH13 - 0-251 = X/Y speed adjustment, Fast - Slow
CH14 - X,Y Vector
I can get the general movements down in the Fixture Creator but all that BS on Channels 5 and 10 is a little confusing. Also, I have no idea what "Vector" means on channel 14, so any help on that would be appreciated. I would be happy to actually scan the manual and post it but, honestly I don't think there is anything else of value in there for the purposes of programming the fixture profile.
You guys are my last hope.....we are opening a new nightclub here in town and we are stuck with about 12 of these that I would love to use.
Thanks for any help you can give!!!