Hi Guys,
I'm interested in getting into DMX lighting but don't have a significantly large budget.
Just wondering if I would be alright to use this USB to DMX interface: http://www.ebay.com.au/itm/USB-DMX-Inte ... 483wt_1139
One thing ive noticed about it is that the DMX out is male. Shouldnt this be female to be able to input correctly into the lights if you sort of get what I mean.
Let me know if there are any other interfaces available for either the same price or cheaper.
Thanks
Is this DMX interface suitable?
-
- Knows how to turn Lights ON
- Posts: 1
- Joined: June 22nd, 2011, 5:07 pm
-
- Knows how to turn Lights ON
- Posts: 1
- Joined: August 11th, 2011, 8:37 am
- FreeStyler Version: 2.96j
- I Use FreeStyler for: Church
Re: Is this DMX interface suitable?
i got one. it works fine except you have to use an old version of freestyler, 2.96j i think
- wardomon
- Commited FS Forum helper
- Posts: 134
- Joined: November 22nd, 2010, 5:58 pm
- FreeStyler Version: 3.4.6
- I Use FreeStyler for: Church
Re: Is this DMX interface suitable?
Get an Enttec Pro. Hands down it's the best there is. Save yourself future hassles. And no, I don't work for Enttec.
A little knowledge is a dangerous thing.
- jpk
- Starting to get to grips with FreeStyler
- Posts: 27
- Joined: March 17th, 2010, 9:53 pm
- FreeStyler Version: 3.5.2
- I Use FreeStyler for: DJ
- Twitter: twitter.com/dmxking
- Contact:
Re: Is this DMX interface suitable?
Get an ultraDMX Pro, a ton more features than the competition.
http://DMXking.com USB DMX and ArtNet interfaces.
-
- Knows how to turn Lights ON
- Posts: 4
- Joined: December 12th, 2011, 12:01 pm
- FreeStyler Version: 3.3.2
- I Use FreeStyler for: DJ
Re: Is this DMX interface suitable?
I bought the following USB-DMX512 module about 6 months ago
http://dmx512.svetla.org/software_en.htm
Is this unit any good or must I rather get a ENTTEC module?
http://dmx512.svetla.org/software_en.htm
Is this unit any good or must I rather get a ENTTEC module?
- Spirit
- Pro Supporter! (Moderator)
- Posts: 1421
- Joined: July 10th, 2010, 8:55 pm
- FreeStyler Version: 3.5.9
- I Use FreeStyler for: Nightclub Lighting
Re: Is this DMX interface suitable?
Just a Quick read and it seems like the USB-DMX512 device uses the FTDI chip and thats the same one as Enttec, DMXking and some other brands uses.
So it should work ok.
But i use the Enttec pro and never had any trouble.
/spirit
So it should work ok.
But i use the Enttec pro and never had any trouble.
/spirit
AMD FX-6100 (3.6ghz)x6, Nvidia 770GTX 4GB, 8GB Ram,ROG MB, enttec Pro, Open enttec, Velleman, T2250MTS-B1 22"touchscreen, Ilyama 23" screen, scans, dimm, rgbled, laser, soundsystem Just a drive-in show. Live and Dance
-
- Knows how to turn Lights ON
- Posts: 4
- Joined: December 12th, 2011, 12:01 pm
- FreeStyler Version: 3.3.2
- I Use FreeStyler for: DJ
Re: Is this DMX interface suitable?
Thank you Spirit for your reply
Reading through all the posts it was very obvious that the ENTTEC module is better.
and if I had the chance I would have rather bought the ENTTEC module.
I'm new in the world of DMX so...I'm learning as I go along.
I also want to congratulate everyone with an excellent- and helpful forum.
Hopefully I will also add to this forum when my system is up and running
Reading through all the posts it was very obvious that the ENTTEC module is better.
and if I had the chance I would have rather bought the ENTTEC module.
I'm new in the world of DMX so...I'm learning as I go along.
I also want to congratulate everyone with an excellent- and helpful forum.
Hopefully I will also add to this forum when my system is up and running