Hello,
I have a RoboHead X-3 LED by Stairville, which has 3 axis, but i cannot find the fixtures for it in the library.
It uses uses 16 DMX channels. Please have a look here: http://images.thomann.de/pics/prod/253248_manual.pdf (or see the attachment)
Where can I find the fixture for this Sairville RoboHead X-3 LED for the library? I've tried using "Fixture Creator", but I do not know where I can set the Pan1/2/Tilt speed channel and above all how to assign the Pan2 using the FreeStyler FixtureCreator in order to properly create/control this fixture in FS.
Can anyone help me? It will be extremely appreciated.
Thanks a lot in advance and have a nice day!
Stairville RoboHead X-3 LED
-
- Knows how to turn Lights ON
- Posts: 6
- Joined: December 12th, 2010, 2:03 pm
- FreeStyler Version: 3.3.2
- I Use FreeStyler for: Film
Stairville RoboHead X-3 LED
You do not have the required permissions to view the files attached to this post.
- Spirit
- Pro Supporter! (Moderator)
- Posts: 1421
- Joined: July 10th, 2010, 8:55 pm
- FreeStyler Version: 3.5.9
- I Use FreeStyler for: Nightclub Lighting
Re: Stairville RoboHead X-3 LED
Take a look at this tutorial and it solves all your problems.
http://www.freestylersupport.com/wiki/f ... d_fixtures
It's the Freestyler wiki and you can find alot more Info about freestyler here.
But if you stil have problems you can ask.
/Spirit
http://www.freestylersupport.com/wiki/f ... d_fixtures
It's the Freestyler wiki and you can find alot more Info about freestyler here.
But if you stil have problems you can ask.
/Spirit
AMD FX-6100 (3.6ghz)x6, Nvidia 770GTX 4GB, 8GB Ram,ROG MB, enttec Pro, Open enttec, Velleman, T2250MTS-B1 22"touchscreen, Ilyama 23" screen, scans, dimm, rgbled, laser, soundsystem Just a drive-in show. Live and Dance
-
- Knows how to turn Lights ON
- Posts: 6
- Joined: December 12th, 2010, 2:03 pm
- FreeStyler Version: 3.3.2
- I Use FreeStyler for: Film
Re: Stairville RoboHead X-3 LED
WOW!!!! You are the man!!! Thank you. It seems to be the solution... I will learn from that page and I will try to create the fixture.
Thank you SO much!!!!!
Thank you SO much!!!!!