antari z-1200 II issues
-
- Knows how to turn Lights ON
- Posts: 2
- Joined: February 26th, 2011, 3:34 am
antari z-1200 II issues
hey all. Has anyone run into a problem with foggers not responding to DMX? I have two antari z-1200 II foggers and neither will respond to freestyler. I can hook them up to a hog 2 and they work fine. I'm using a velleman VM116 interface. Suggestions?
-
- Possibly Becoming Qualified FS User
- Posts: 40
- Joined: March 3rd, 2010, 6:37 pm
- FreeStyler Version: 3.4
- I Use FreeStyler for: Stage Show
- Twitter: twitter.com/dnshaw18
Re: antari z-1200 II issues
im having issues with this smoke machine, using an enttec open dmx. should the green light on the back light up when it has dmx input?? cos im not getting that lit
but i can control it with a scanmaster sm1612
but i can control it with a scanmaster sm1612
Setup:
SOH USB-DMX512 module
Samsung N102 Netbook
FS 3.4.8
SOH USB-DMX512 module
Samsung N102 Netbook
FS 3.4.8
-
- Just started using FS
- Posts: 13
- Joined: January 23rd, 2011, 6:03 pm
- FreeStyler Version: 3
- I Use FreeStyler for: DJ
Re: antari z-1200 II issues
i believe the green light only goes on when the hazer or smoke machine is ready and warmed up
-
- Possibly Becoming Qualified FS User
- Posts: 40
- Joined: March 3rd, 2010, 6:37 pm
- FreeStyler Version: 3.4
- I Use FreeStyler for: Stage Show
- Twitter: twitter.com/dnshaw18
Re: antari z-1200 II issues
i meant on the back of the machine rathe than on the remote, the one on the machine went out when i unplugged it from the SM1612
Setup:
SOH USB-DMX512 module
Samsung N102 Netbook
FS 3.4.8
SOH USB-DMX512 module
Samsung N102 Netbook
FS 3.4.8
- Spirit
- Pro Supporter! (Moderator)
- Posts: 1421
- Joined: July 10th, 2010, 8:55 pm
- FreeStyler Version: 3.5.9
- I Use FreeStyler for: Nightclub Lighting
Re: antari z-1200 II issues
i also have a SM1612.
maby you can try to hookup the hazer on the SM1612.
now look at the Back of the SM1612 there is a little black Switch.
with the switch you can change
pin1:common
pin2:-
pin3:+
to
pin1:common
pin2:+
pin3:-
look up which on works maby you need to make a Patch cabel
maby you can try to hookup the hazer on the SM1612.
now look at the Back of the SM1612 there is a little black Switch.
with the switch you can change
pin1:common
pin2:-
pin3:+
to
pin1:common
pin2:+
pin3:-
look up which on works maby you need to make a Patch cabel
AMD FX-6100 (3.6ghz)x6, Nvidia 770GTX 4GB, 8GB Ram,ROG MB, enttec Pro, Open enttec, Velleman, T2250MTS-B1 22"touchscreen, Ilyama 23" screen, scans, dimm, rgbled, laser, soundsystem Just a drive-in show. Live and Dance