When using the built-in faders, belonging to the DMX400 controls, like speed or intensity 85% of the total range is unusable, they do not change anything.
However, the upper 10% is very sensitive. It almost looks like the controls are logaritmic instead of linear. As we are using a MIDI-controller with a small fader, setting up speed is very sensitive. Can it be changed so the full fader is linear? So 50% of slider up = 50% of max dmx400 speed
ps. Mantis is broken as we get application error #11.
DMX400 faders are not 'linear'
Forum rules
FreeStyler is made by Rapheal Wellekens there is no other person developing the software so please be aware that adding new features
and changing current ones may require a lot of work. This is a place to discuss ideas, please make requests via the feature request option on the BUG TRACKER
FreeStyler is made by Rapheal Wellekens there is no other person developing the software so please be aware that adding new features
and changing current ones may require a lot of work. This is a place to discuss ideas, please make requests via the feature request option on the BUG TRACKER
-
- LJ
- Posts: 9
- Joined: December 19th, 2012, 12:02 am
- FreeStyler Version: 3.5
- I Use FreeStyler for: Nightclub Lighting
- Twitter: none
- studijo
- Starting to get to grips with FreeStyler
- Posts: 22
- Joined: August 2nd, 2012, 11:06 am
- FreeStyler Version: 3.5.9
- I Use FreeStyler for: DJ
- Contact:
Re: RE: DMX400 faders are not 'linear'
Hi Martie. Does the DMX 400 works normally when operating with the sliders in FS, not with your external controller?martie wrote:When using the built-in faders, belonging to the DMX400 controls, like speed or intensity 85% of the total range is unusable, they do not change anything.
However, the upper 10% is very sensitive. It almost looks like the controls are logaritmic instead of linear. As we are using a MIDI-controller with a small fader, setting up speed is very sensitive. Can it be changed so the full fader is linear? So 50% of slider up = 50% of max dmx400 speed
ps. Mantis is broken as we get application error #11.
Verstuurd vanaf mijn SM-G920F met Tapatalk
Freestyler 3.5.9 on Windows 8.1 with DMX4All USB interface.
BCF2000 with firmware 1.10
Fixture setup: 4 x PAR64 controlled by Dimmpack, 2 x Eurolite TSL-200 scanners, 1 x Ayra TDC-33, 1 x Geni FL-1800D strobo, 1 x Antari Z-1500 fog machine
BCF2000 with firmware 1.10
Fixture setup: 4 x PAR64 controlled by Dimmpack, 2 x Eurolite TSL-200 scanners, 1 x Ayra TDC-33, 1 x Geni FL-1800D strobo, 1 x Antari Z-1500 fog machine
-
- LJ
- Posts: 9
- Joined: December 19th, 2012, 12:02 am
- FreeStyler Version: 3.5
- I Use FreeStyler for: Nightclub Lighting
- Twitter: none
Re: RE: DMX400 faders are not 'linear'
Even with a reset of FS or no external controls attachedstudijo wrote: ↑June 24th, 2017, 9:43 amHi Martie. Does the DMX 400 works normally when operating with the sliders in FS, not with your external controller?martie wrote:When using the built-in faders, belonging to the DMX400 controls, like speed or intensity 85% of the total range is unusable, they do not change anything.
However, the upper 10% is very sensitive. It almost looks like the controls are logaritmic instead of linear. As we are using a MIDI-controller with a small fader, setting up speed is very sensitive. Can it be changed so the full fader is linear? So 50% of slider up = 50% of max dmx400 speed
ps. Mantis is broken as we get application error #11.
Verstuurd vanaf mijn SM-G920F met Tapatalk
- studijo
- Starting to get to grips with FreeStyler
- Posts: 22
- Joined: August 2nd, 2012, 11:06 am
- FreeStyler Version: 3.5.9
- I Use FreeStyler for: DJ
- Contact:
Re: RE: Re: RE: DMX400 faders are not 'linear'
I would suggest to re-install FSmartie wrote:Even with a reset of FS or no external controls attachedstudijo wrote: ↑June 24th, 2017, 9:43 amHi Martie. Does the DMX 400 works normally when operating with the sliders in FS, not with your external controller?martie wrote:When using the built-in faders, belonging to the DMX400 controls, like speed or intensity 85% of the total range is unusable, they do not change anything.
However, the upper 10% is very sensitive. It almost looks like the controls are logaritmic instead of linear. As we are using a MIDI-controller with a small fader, setting up speed is very sensitive. Can it be changed so the full fader is linear? So 50% of slider up = 50% of max dmx400 speed
ps. Mantis is broken as we get application error #11.
Verstuurd vanaf mijn SM-G920F met Tapatalk
Verstuurd vanaf mijn SM-G920F met Tapatalk
Freestyler 3.5.9 on Windows 8.1 with DMX4All USB interface.
BCF2000 with firmware 1.10
Fixture setup: 4 x PAR64 controlled by Dimmpack, 2 x Eurolite TSL-200 scanners, 1 x Ayra TDC-33, 1 x Geni FL-1800D strobo, 1 x Antari Z-1500 fog machine
BCF2000 with firmware 1.10
Fixture setup: 4 x PAR64 controlled by Dimmpack, 2 x Eurolite TSL-200 scanners, 1 x Ayra TDC-33, 1 x Geni FL-1800D strobo, 1 x Antari Z-1500 fog machine
-
- LJ
- Posts: 9
- Joined: December 19th, 2012, 12:02 am
- FreeStyler Version: 3.5
- I Use FreeStyler for: Nightclub Lighting
- Twitter: none
Re: DMX400 faders are not 'linear'
Already did. Used notebook and two different desktops