One moving head starts at same position during sequence!
Forum rules
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
-
- Just started using FS
- Posts: 10
- Joined: April 6th, 2014, 8:16 pm
- FreeStyler Version: 3.5.5
- I Use FreeStyler for: DJ
- Twitter: twitter.com/djsolstice
One moving head starts at same position during sequence!
Hi all. I have two moving heads (China brand). When I play them to a Bezier shape all is well. But when I recall that shape in the sequence/cue window, one of the moving heads points up to the ceiling before starting its path. It's not the DMX signal because I put a terminator and tried different cables. The other unit father on the route is fine and doesn't do this. It's not the unit either because I switched the channels on them and that didn't fix it, the other started doing it. It has something to do with the fact that it's Inversed pan and tilt. When I press the button to run the sequence it's like it's trying to reset a position or something. Never encountered this before. HELP!!!
- buttza
- FS is my life
- Posts: 351
- Joined: January 7th, 2010, 2:14 pm
- FreeStyler Version: 3.6.4
- I Use FreeStyler for: Stage Show
- Twitter: twitter.com/@buttza
Re: One moving head starts at same position during sequence!
Check the starting channel is correct.
Also reset the lighting fixture then re channel.
Which way is the base and yoke facing by default?
Also reset the lighting fixture then re channel.
Which way is the base and yoke facing by default?