These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

What the hell...

Post Reply
User avatar
dmxlighting
FS is my life
Posts: 1022
Joined: August 11th, 2008, 11:46 pm
FreeStyler Version: beta
I Use FreeStyler for: Where do I start?
Location: London and South UK
Contact:

Re: What the hell...

Post by dmxlighting » June 9th, 2009, 5:22 pm

Nobody but Raph knows at the moment.


Freestyler DMX - Pissing over the competition since 199x
What do you want for free ?

Freelance Lighting Programmer / Sound Engineer / Designer / Installer and General All Round AV Expert

User avatar
LJ_krede.dk
Moderator
Posts: 1028
Joined: October 29th, 2007, 9:01 pm
FreeStyler Version: 3.3.7
I Use FreeStyler for: Where do I start?
Location: Aalborg (Denmark)

Re: What the hell...

Post by LJ_krede.dk » June 9th, 2009, 7:44 pm

what is suntrix? :roll:
/LJ_krede.dk
Aalborg, Denmark
Moderator, Supporter and Bug report manager for the FreeStyler community
Found a bug? Submit a Bug Report

User avatar
dmxlighting
FS is my life
Posts: 1022
Joined: August 11th, 2008, 11:46 pm
FreeStyler Version: beta
I Use FreeStyler for: Where do I start?
Location: London and South UK
Contact:

Re: What the hell...

Post by dmxlighting » June 9th, 2009, 9:02 pm

LJ_krede.dk wrote:what is suntrix? :roll:

Refer to my last post.........
Freestyler DMX - Pissing over the competition since 199x
What do you want for free ?

Freelance Lighting Programmer / Sound Engineer / Designer / Installer and General All Round AV Expert

User avatar
LJ_krede.dk
Moderator
Posts: 1028
Joined: October 29th, 2007, 9:01 pm
FreeStyler Version: 3.3.7
I Use FreeStyler for: Where do I start?
Location: Aalborg (Denmark)

Re: What the hell...

Post by LJ_krede.dk » June 9th, 2009, 10:02 pm

ups.... i think i slept while i was reading this topic..... sorry :oops:
/LJ_krede.dk
Aalborg, Denmark
Moderator, Supporter and Bug report manager for the FreeStyler community
Found a bug? Submit a Bug Report

User avatar
lj_raph
FreeStyler Developer
Posts: 66
Joined: July 10th, 2007, 7:16 am
FreeStyler Version: 3.2.1
I Use FreeStyler for: Stage Show
Twitter: twitter.com/
Location: Belgium
Contact:

Re: What the hell...

Post by lj_raph » June 10th, 2009, 1:55 pm

I'll give a hint: ;)

active sunstrips + animations + text

SUNstrips + maTRIX -> SUNTRIX
Raphaël
FreeStyler support & development

User avatar
matt
Admin
Posts: 469
Joined: July 9th, 2007, 7:00 pm
FreeStyler Version: NULL
I Use FreeStyler for: DJ
Twitter: twitter.com/hankosky
Location: Tinley Park, IL, USA
Contact:

Re: What the hell...

Post by matt » June 10th, 2009, 4:57 pm

NICE!!!!!!!!!!!

I GET IT!!!!

Another Clue ->

Image
Matt Hankosky
twitter.com/hankosky
flickr.com/photos/mattxhank

User avatar
lj_raph
FreeStyler Developer
Posts: 66
Joined: July 10th, 2007, 7:16 am
FreeStyler Version: 3.2.1
I Use FreeStyler for: Stage Show
Twitter: twitter.com/
Location: Belgium
Contact:

Re: What the hell...

Post by lj_raph » June 11th, 2009, 7:29 am

Currently only with intensitychannels, but the code can be changed to RGB.

The system works with animated gifs, if someone likes to create some he can always contact me for more details.
The plugin will be available when the new version is released, if someone wants to test it feel free and send me an email.

Best regards

Raph
Raphaël
FreeStyler support & development

User avatar
matt
Admin
Posts: 469
Joined: July 9th, 2007, 7:00 pm
FreeStyler Version: NULL
I Use FreeStyler for: DJ
Twitter: twitter.com/hankosky
Location: Tinley Park, IL, USA
Contact:

Re: What the hell...

Post by matt » June 11th, 2009, 1:58 pm

I would Love to Test it.. But i dont have any SunStrips :(
Matt Hankosky
twitter.com/hankosky
flickr.com/photos/mattxhank

User avatar
Mattotone
Android Dev (Moderator)
Posts: 1168
Joined: July 10th, 2007, 5:30 pm
FreeStyler Version: BETA
I Use FreeStyler for: Just for the Fun of it.

Re: What the hell...

Post by Mattotone » June 11th, 2009, 8:36 pm

iv tested it using the easy view and it does look very good.
The effect seems to work best with 12 strips to give you any kind of resolution. any less and the majority of the pattern is missing. 6 will also give a fairly good setup.
but i dont have that money to spend. but it seems to have open the door for plugins :fs:
Always have your stuff when you need it with @Dropbox. 2GB account is free! http://db.tt/J4c5G8C

User avatar
LJ_krede.dk
Moderator
Posts: 1028
Joined: October 29th, 2007, 9:01 pm
FreeStyler Version: 3.3.7
I Use FreeStyler for: Where do I start?
Location: Aalborg (Denmark)

Re: What the hell...

Post by LJ_krede.dk » June 11th, 2009, 9:50 pm

Mattotone wrote:iv tested it using the easy view and it does look very good.
how do you get easy view to visualize the sunstrips? i have many different sunstrips fixtures in easy view but cant seem to get them visualize anything. which fixture are you using?
/LJ_krede.dk
Aalborg, Denmark
Moderator, Supporter and Bug report manager for the FreeStyler community
Found a bug? Submit a Bug Report

User avatar
Mattotone
Android Dev (Moderator)
Posts: 1168
Joined: July 10th, 2007, 5:30 pm
FreeStyler Version: BETA
I Use FreeStyler for: Just for the Fun of it.

Re: What the hell...

Post by Mattotone » June 11th, 2009, 10:58 pm

Not as cleverly as your thinking im afraid.
i used single par 36 stacked upon each other gives the same effect just a lot of work.
Always have your stuff when you need it with @Dropbox. 2GB account is free! http://db.tt/J4c5G8C

bckeeping
Can now teach FS to others (Hopefully!)
Posts: 92
Joined: May 19th, 2008, 11:59 am
I Use FreeStyler for: Nightclub Lighting

Re: What the hell...

Post by bckeeping » June 12th, 2009, 12:45 pm

Hi guys,

This looks like a lot of fun if a little expensive on the fixture front, could look bloomin good though :)

Raph, is there any way to change which bit of the animated GIF the fixtures are looking it.

E.g. on the ever increasing circles gif, you only get the left hand edge of the ring as it goes out if you have a 12 x 12 matrix.
Would be good if you could centre it or something :)

B.

User avatar
Mattotone
Android Dev (Moderator)
Posts: 1168
Joined: July 10th, 2007, 5:30 pm
FreeStyler Version: BETA
I Use FreeStyler for: Just for the Fun of it.

Re: What the hell...

Post by Mattotone » June 12th, 2009, 9:36 pm

C:/freestyler has been chosen due to windows vista and its UAC.
I do agree that there should be an option to change the instalation path, and then elevate FS.
if you manually move the plugin into the freestyler folder it still seems not to work i think it currently hard coded into fs
Always have your stuff when you need it with @Dropbox. 2GB account is free! http://db.tt/J4c5G8C

User avatar
LJ_krede.dk
Moderator
Posts: 1028
Joined: October 29th, 2007, 9:01 pm
FreeStyler Version: 3.3.7
I Use FreeStyler for: Where do I start?
Location: Aalborg (Denmark)

Re: What the hell...

Post by LJ_krede.dk » June 13th, 2009, 1:04 am

Mattotone wrote:if you manually move the plugin into the freestyler folder it still seems not to work i think it currently hard coded into fs
i did that without any problems on Vista Home Premium.. I have the UAC disabled thou

but any ways,,, we should not talk about bug and/or changes to beta versions on the forum.. Raph asked the beta testers not to!!!!
/LJ_krede.dk
Aalborg, Denmark
Moderator, Supporter and Bug report manager for the FreeStyler community
Found a bug? Submit a Bug Report

User avatar
LJ_krede.dk
Moderator
Posts: 1028
Joined: October 29th, 2007, 9:01 pm
FreeStyler Version: 3.3.7
I Use FreeStyler for: Where do I start?
Location: Aalborg (Denmark)

Re: What the hell...

Post by LJ_krede.dk » June 13th, 2009, 1:14 am

Onge wrote: Yes you can make a matrix with LED Par cans and LED Bars but you do not get the resolution you would require.
For example a 16 x 16 grid of LED Par cans will only be able to show a picture of 16 x 16 pixels as each LED Par Can can only be one colour at a time.
You can use Ordinary PAR64 if you have enough of them:

http://www.youtube.com/watch?v=QH0LuH_E ... re=related
(this has also a small matrix of atomics :D )

http://www.youtube.com/watch?v=daSEWrxO ... re=related

http://www.youtube.com/watch?v=bOU20Fm7JoY

http://www.youtube.com/watch?v=P2Th5651 ... re=related
/LJ_krede.dk
Aalborg, Denmark
Moderator, Supporter and Bug report manager for the FreeStyler community
Found a bug? Submit a Bug Report

User avatar
djSupport
Windows/Phone App Dev (Admin)
Posts: 1603
Joined: July 9th, 2007, 6:57 pm
FreeStyler Version: Lost
I Use FreeStyler for: Just for the Fun of it.
Location: Nuneaton, Warwickshire
Contact:

Re: What the hell...

Post by djSupport » June 17th, 2009, 10:11 am

UAC problems should be sorted now or on any future beta...

thevoltmaster
Knows how to turn Lights ON
Posts: 1
Joined: September 5th, 2009, 6:37 am
FreeStyler Version: 3.01
I Use FreeStyler for: Just for the Fun of it.
Twitter: twitter.com/

Re: What the hell...

Post by thevoltmaster » September 5th, 2009, 6:44 am

I have 2 strings of Color Kinetics iColor Flex RGB LED Nodes. I currently patch them as generic 3 channel LEDs and chase them normally. What does it take to become a beta tester to get this matrix plugin. Would there be a way to make it work with RGB?

-Michael

User avatar
remco_k
Moderator
Posts: 1160
Joined: October 12th, 2008, 11:27 pm
FreeStyler Version: N/A
I Use FreeStyler for: To help others here on the Forum!
Location: Utrecht (Netherlands)

Re: What the hell...

Post by remco_k » September 5th, 2009, 8:34 am

thevoltmaster wrote:I have 2 strings of Color Kinetics iColor Flex RGB LED Nodes. I currently patch them as generic 3 channel LEDs and chase them normally. What does it take to become a beta tester to get this matrix plugin. Would there be a way to make it work with RGB?

-Michael
Send an e-mail to the user lj_raph of this forum. He's the developer of FreeStyler and may add you as beta tester.
Developer of the Sound 2 Light application (SL.exe) for FreeStyler: https://www.digiplay.nl/fs
Electronics runs on magic smoke. If it escapes, the electronics won't work anymore!
Need a SHOUTcast stream?: https://www.digiplay.nl

Post Reply

Return to “Suntrix & LedTrix plugin”