Support Forum

I just picked up some of these mini DMX spots.

https://www.ebay.com/itm/292242352439

I have been messing with the figure creator but can't figure out how to get the strobe dimmer and shutter to work right all on the same channel. Any help with creating a fixture file would be greatly appreciated.

Hey dbqtech, you can configure your fixture file to have different functions on the same DMX channel. The range of course should not overlap (there are some functions where this is possible).

If you do not manage it by yourself with this information, just post the fixture file here (zip if necessary) so someone can take a look at it and possibly help.

Bye, Laudrin

I too have a few of these. Not the brightest but fit my need for effect. I started within fixture creator by starting a 6ch blank custom fixture and saved it. Using the sliders in Freestyler was able to map each channel and functions inside the 0~255 range. The light does function at 95%. My only problem that I have tried and tried to configure is [ch1 dimmer 0~134 value]. When using the ch1 value range [0~134] the channels 2,3,4 and 5 all move from 0~255 simultaneously producing a white light. I would like to use ch1 slider [0~134] to dim current output color spectrum other than RGBW. Attached is the fixture profile and manual. Thank you.

Did you create the driver for this one ?

Yes I did in fixture creator. For some reason this pinspot is giving me issues now. Some how my current profile on computer is different than the included image above...going to jump in and change it to what the photo shows. Currently when the light turns on its stuck in strobe mode

Bonjour, J'ai acheté ces mêmes lumières "RGBW Spot Light" sur AliExpress et je rame pour faire les macros... est-ce que quelqu'un aurait le fichier pilote ?
Merci, beaucoup !